Hi Arianna, thanks for the precise info. Will wait than. For now, I will feed the ES.
Rgds. Franz -----Ursprüngliche Nachricht----- Von: [email protected] [mailto:[email protected]] Im Auftrag von Arianna Avanzini Gesendet: Dienstag, 5. Mai 2015 14:15 An: [email protected] Betreff: Re: [Ntop] [MASSMAIL]Re: Historical Data On Tue, May 5, 2015 at 2:10 PM, Skale Franz <[email protected]> wrote: > > Hi, > thanks for the quick response. > Only two lines are plotted to stdout: > 05/May/2015 14:08:10 [src/NetworkInterface.cpp:1207] Cleanup interface > Historical > 05/May/2015 14:08:10 [src/NetworkInterface.cpp:1181] Started packet polling > on interface Historical [id: 7]... > > That's all. OK thanks, we'll try to look into the issue. But again, the current historical interface is about to be replaced with something much better. > So, you mean i should change to ES ? > I can give it a try, if it will work with ES. > As of now ElasticSearch support includes only dumping data on ES but not retrieving it, so data on ES cannot be accessed using ntopng's web interface; if you just need to feed ES with data you'll elaborate in some other way it is fine, otherwise you'll have to wait until the ES support is completed. Thanks, Arianna > Rgds. > > Franz > > > ________________________________________ > Von: [email protected] > [[email protected]]" im Auftrag von "Arianna > Avanzini [[email protected]] > Gesendet: Dienstag, 05. Mai 2015 14:06 > An: [email protected] > Betreff: [MASSMAIL]Re: [Ntop] Historical Data > > On Tue, May 5, 2015 at 2:01 PM, Skale Franz > <[email protected]> wrote: >> >> >> Hi, > > Hi Franz, > >> >> Just tested ntopng version 1.99.150505 for evaluation of netflow. >> >> Works just fine, but the historical data not. >> >> I use the switch –F db and see, that the sqlitedb grows and has a lot >> of data in it. >> >> Using the historical data interface, and selecting a time frame of >> collected data tells me, that the load data was successful but doesn’t show >> anything. >> >> 0 packets in the selected time frame. >> >> Is this intended to work, or is this function only available in the >> commercial release ? >> >> I compiled the pf_ring module and the userland libs. >> >> Ntopng doesn’t show any error, nprobe too. >> >> Perhaps I missed something, but regarding the README.* Files, my >> setup is correct. >> >> So, perhaps someone knows a solution for my problem. >> > > The current historical interface has been reported as buggy by many > users; actually, it is almost a placeholder and is about to be > replaced with a newer one based on ElasticSearch. > > Anyway, until that is done - could you please provide the output > ntopng prints on the console when you try to load data from the > historical interface? > > Thanks, > Arianna > > >> >> >> >> >> Rgds. >> >> >> >> Franz >> >> >> _______________________________________________ >> Ntop mailing list >> [email protected] >> http://listgateway.unipi.it/mailman/listinfo/ntop > > > > -- > /* > * Arianna Avanzini > * [email protected] > * http://ava.webhop.me > */ > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop -- /* * Arianna Avanzini * [email protected] * http://ava.webhop.me */ _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
