On Wed, Feb 24, 2016 at 11:51 PM, dan <[email protected]> wrote: > Is ndpi multi threaded? The pi2 is a quad core. Alternatively, a > beaglebone black. > yes, but a single thread is spawn for each interface. So you won't be able to exploit all the 4 cores for 1 mirrored interface. Same for the beaglebone.
> On Feb 24, 2016 3:46 PM, "Simone Mainardi" <[email protected]> wrote: > >> Hi Dan, >> >> The setup you have indicated is OK and straightforward. However, I am not >> sure you can handle 130Mbps w/ nDPI using rp2: it has a 900 Mhz cortex... >> >> >> Simone >> >> On Wed, Feb 24, 2016 at 5:47 PM, dan <[email protected]> wrote: >> >>> I'm interested in ntop and I want to try it with some light weight >>> hardware... >>> >>> I see that there is an inexpensive license for ntopng-pro for embedded. >>> >>> I basically want to mirror a switch port and plug the Raspberry Pi2 into >>> the mirror port and analyze that w/ DPI. >>> >>> Is this a pretty straight forward setup? >>> >>> Also, what kind of packet handling can I expect the Pi2 to handle? It's >>> a gigabit port, but the peak throughput right now is about 130Mbps >>> aggregate. >>> >>> Thanks. >>> >>> _______________________________________________ >>> Ntop mailing list >>> [email protected] >>> http://listgateway.unipi.it/mailman/listinfo/ntop >>> >> >> >> _______________________________________________ >> Ntop mailing list >> [email protected] >> http://listgateway.unipi.it/mailman/listinfo/ntop >> > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop >
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
