Alexander cento sends to all destinations simultaneously Luca
> On 28 Feb 2017, at 18:41, Jesse Alexander <[email protected]> wrote: > > Hello, > > We are using Cento to send netflow to multiple destinations. > > In the nprobe help file, I see there is a -a option to send full flows to all > destinations. I do not see this as an option in the Cento help file. > > [--collector|-n] <host:port|none> | Address of the NetFlow collector(s). > | Multiple collectors can be defined using > | multiple -n flags. In this case flows > | will be sent in round robin mode to > | all defined collectors if the -a flag > | is used. Note that you can specify > | both IPv4 and IPv6 addresses. > | If you specify none as value, > | no flow will be export; in this case > | the -P parameter is mandatory. > | Note that you can specify the protocol > | used to send packets. Example: > | udp://192.168.0.1:2055,tcp://10.1.2.3:2055 > > [--all-collectors|-a] | If several collectors are defined, this > | option gives the ability to send all > | collectors all the flows. If the flag is > | omitted collectors are selected in > | round robin. > > Is this supported in Cento? If not, is cento sending round robin or full > flows to all destinations? > > Kind regards, > > Jesse > > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
