And it would be great to have an official build from you rather than me making another mess of the make as i did last time. I would imagine other RPi users would also be grateful.
I presume you would put it in a folder http://packages.ntop.org/RaspberryPI/stretch_pi/ Charles On 29 Sep 2017 10:11 a.m., "Charles Hooper" <[email protected]> wrote: Luca, It's just the next Debian release (v9) see https://www.debian.org/releases/ On RaspberryPi, Debian is called Raspbian see https://www.raspberrypi. org/downloads/raspbian/ Charles On 29 September 2017 at 09:30, Luca Deri <[email protected]> wrote: > Charles > perhaps a static build would help. I am not familiar with Stretch: what is > it and where I can find it? > > Regards Luca > > On 29 Sep 2017, at 02:21, Charles Hooper <[email protected]> > wrote: > > Luca, > > Thanks for the response. I reinstalled from the beginning. > > However, I had to use Stretch not Jessie because RPI has moved on from Jessie > as its default. > > I got to the last step in the instructions on > http://packages.ntop.org/RaspberryPI/ (hoping the Jessie install would be ok) > > but got the following which I think means I need a Stretch specific build. > Any chance you could do one? > > Charles > > root@raspberrypi:/home/pi# apt-get install ntopng nprobe > Reading package lists... Done > Building dependency tree > Reading state information... Done > Some packages could not be installed. This may mean that you have > requested an impossible situation or if you are using the unstable > distribution that some required packages have not yet been created > or been moved out of Incoming. > The following information may help to resolve the situation: > > The following packages have unmet dependencies: > nprobe : Depends: libzmq3 but it is not installable > Depends: libhiredis0.10 but it is not installable > Recommends: ntopng-data but it is not going to be installed > ntopng : Depends: librrd4 but it is not installable > Depends: libzmq3 but it is not installable > Depends: libssl1.0.0 but it is not installable > Depends: libhiredis0.10 but it is not installable > Depends: libmysqlclient18 but it is not installable > Recommends: ntopng-data but it is not going to be installed > E: Unable to correct problems, you have held broken packages. > > <end> > > ======= > > Hi Charles > > packages have been just rebuilt. You do not need nProbe. In order to start > ntopng you need to be root. > > Please see the ntopng user’s guide at > http://www.ntop.org/support/documentation/documentation/ > <http://www.ntop.org/support/documentation/documentation/> > > Regards Luca > > > >* On 28 Sep 2017, at 04:43, Charles Hooper <charles at futurescope.co.uk > ><http://listgateway.unipi.it/mailman/listinfo/ntop>> wrote: > *> >* I am a newbie so please forgive me if I ask a dumb question. > *> >* I'm trying to install topng on my RPi with Stretch to monitor my home > network (Mikrotik router). > *> >* The latest build you have is 2.5 for Jessie. > *> >* The easiest thing would be to ask you to rebuild ntopng on stretch so I > can just install it, but I thought I would have a go myself!! > *> >* After many trials I think I've installed the latest version. however > the ntopng web page is not available on port 3000. > *> >* the log says > *>* ==== > *>* 28/Sep/2017 11:10:01 [Trace.cpp:116] Logging into > /var/tmp/ntopng/ntopng.log > *>* 28/Sep/2017 11:10:01 [Ntop.cpp:1419] Setting local networks to > 127.0.0.0/8 <http://127.0.0.0/8> <http://127.0.0.0/8 <http://127.0.0.0/8>> > *>* 28/Sep/2017 11:10:01 [Redis.cpp:111] Successfully connected to redis > 127.0.0.1 <http://127.0.0.1/>:6379 at 0 > <http://listgateway.unipi.it/mailman/listinfo/ntop> > *>* 28/Sep/2017 11:10:01 [Redis.cpp:111] Successfully connected to redis > 127.0.0.1 <http://127.0.0.1/>:6379 at 0 > <http://listgateway.unipi.it/mailman/listinfo/ntop> > *>* 28/Sep/2017 11:10:09 [Ntop.cpp:1357] Parent process is exiting (this is > normal) > *>* 28/Sep/2017 11:10:10 [NetworkDiscovery.cpp:48] ERROR: Unable to create > pcap socket [1/Operation not permitted] > *>* 28/Sep/2017 11:10:17 [main.cpp:221] ERROR: Unable to create interface eth0 > *>* 28/Sep/2017 11:10:23 [main.cpp:221] ERROR: Unable to create interface lo > *>* 28/Sep/2017 11:10:23 [main.cpp:280] ERROR: Startup error: missing > super-user privileges ? > *>* ==== > *> >* and when I try to install nprobe (because I think it is missing) I get > *> >* ==== > *>* sudo apt-get install nprobe > *>* Reading package lists... Done > *>* Building dependency tree > *>* Reading state information... Done > *>* Some packages could not be installed. This may mean that you have > *>* requested an impossible situation or if you are using the unstable > *>* distribution that some required packages have not yet been created > *>* or been moved out of Incoming. > *>* The following information may help to resolve the situation: > *> >* The following packages have unmet dependencies: > *>* nprobe : Depends: libzmq3 but it is not installable > *>* Depends: libhiredis0.10 but it is not installable > *>* E: Unable to correct problems, you have held broken packages. > *>* ==== > *> >* Any ideas what I am doing wrong? > *> >* Charles > *>* _______________________________________________ > *>* Ntop mailing list > *>* Ntop at listgateway.unipi.it > <http://listgateway.unipi.it/mailman/listinfo/ntop> > *>* http://listgateway.unipi.it/mailman/listinfo/ntop > <http://listgateway.unipi.it/mailman/listinfo/ntop>* > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > > > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > -- Charles Hooper +44 7986 841714 <+44%207986%20841714> www.linkedin.com/in/hoopercharles/
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
