Hi, > On 1 Aug 2018, at 10:44, Victor Hooi <[email protected]> wrote: > > Hi, > > Ntopng Edge looks really awesome! > > I'm reading through the documentation at https://www.ntop.org/guides/nedge/ > <https://www.ntop.org/guides/nedge/>. > > Our plan is to use Ntopng Edge in bridge mode. > > We have a pfSense router, and we use VLANs to segment up our LAN. The router > is configured to give different DHCP addresses range for each VLAN. >
Ok, so you don't have to worry about overlapping IP addresses on different VLANs that are not handled by nEdge as described in the guide. > However, the docs mention that neither captive portal or DNS portal will > work. Is there a specific reason for this limitation? Currently this is not supported for simplicity. Those features involve redirects and that can become cumbersome with VLANs. If you have special requirements, please tell us a use casa and we will consider it for implementation. > > Also, what other configuration is necessary for ntopng edge to work in a VLAN > network? Assuming you are on a VLAN trunk, that is written on the readme (https://www.ntop.org/guides/nedge/bridging.html?highlight=vlan <https://www.ntop.org/guides/nedge/bridging.html?highlight=vlan>). If you have VLAN-interfaces on the host, there's nothing special to do. You will see them appearing in the nEdge UI. > > And are there other limitations as well, if we use VLANs? > > Thanks, > Victor > > PS: If I notice any typos in the documentation - is there some way I can > submit PRs or fixes? > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
