Stanley Hopcroftt wrote: > > Dear Ladies and Gentlemen, > > I am wriitng to ask your help with this wonderful product. > > ntop is wonderful, more than adequate for my needs (the traffic > matrix and the protocol distribution are all I need now), but there are > major problems when I try and build it under FreeBSD 4.1-RELEASE and > 4.1.1-RELEASE. > > ntop-1.1 compiles fine but uses all the CPU; 1.3.[12]] won't compile > under FreeBSD 4.1(.1)?. > > Problem FreeBSD > 4.1-R 4.1.1-R > > 1.1 Excessive CPU consumption (>= 95%) > > 1.3.1 Won't compile > > 1.3.2 Wont' compile > > Here are the errors reported by Make under > > FreeBSD 4.1-RELEASE/ntop-1.3.2 > tsitc> make > make all-recursive > Making all in . > Making all in plugins > Making all in . > Making all in pep > make: don't know how to make all. Stop > *** Error code 1 > > Stop in /usr/home/anwsmh/build/ntop-1.3.2/plugins. > *** Error code 1 > > Stop in /usr/home/anwsmh/build/ntop-1.3.2. > *** Error code 1 > > Stop in /usr/home/anwsmh/build/ntop-1.3.2. > tsitc> > > Same errors in 4.1.1 > > Seniour Deri recommended getting the last CVS updates in the last few > days (to deal with excess CPU consumption) ; this is not something I > can do. > > Thank you. > > Yours sincerely, > > S Hopcroft > > Network Specialist > IP Australia > > +61 2 6283 3189 > +61 2 6281 1353 FAX -- *********************************************************************** Borja Marcos * Internet: [EMAIL PROTECTED] Alangoeta, 11 1 izq * [EMAIL PROTECTED] 48990 - Algorta (Vizcaya) * [EMAIL PROTECTED] SPAIN * [EMAIL PROTECTED] *********************************************************************** --- FreeBSD, turning PCs into workstations
