Sure, anything can be added subject to reasonability - Luca won't tolerate
pushing ntop too far a field.
Contact me off list for programming rates (sponsored development)...
-----Burton
US-based commercial support for ntop:
http://www.ntopsupport.com
mailto:[EMAIL PROTECTED]
Search the ntop mailing lists at gmane:
http://search.gmane.org
HowTo Ask for Help at
http://snapshot.ntop.org/faq.php#83
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Dzevad Hadzic
Sent: Tuesday, July 29, 2003 5:57 PM
To: [EMAIL PROTECTED]
Subject: Re: [Ntop] Bandwith Measurement per User (IP)
Could that feature be added to some future version of ntop ?
----- Original Message -----
From: "Burton M. Strauss III" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 29, 2003 9:55 PM
Subject: RE: [Ntop] Bandwith Measurement per User (IP)
> Off hand, nothing obvious. However, the raw data you want is in the RRDs,
> if you enable the plugin. The default is 300s resolution, but you could
> push that to say 15s without too much trouble unless it's a huge network.
>
> Once the data is in the rrd, you would have to extract it and graph it
using
> something external.
>
> For example, there are RRDs like these:
>
> /usr/share/ntop/rrd/interfaces/eth2/hosts/64/154/81/15/bytesSent.rrd
> /usr/share/ntop/rrd/interfaces/eth2/hosts/64/154/81/15/bytesRcvd.rrd
>
> one per host.
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop
