Please resubmit using the PR form and only ONE problem PER.

FWIW, there's a similar report on the rrd issue and the 2nd one will need
gdb data.

-----Burton

> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
> Clinton Hardwick (C)
> Sent: Friday, February 20, 2004 7:47 AM
> To: [EMAIL PROTECTED]
> Subject: [Ntop] NTOP3.0pre1 crashing without reason and also running RRD
> errors
>
>
> ==================================================================
> =============
> This e-mail and its contents are subject to the Telkom SA Limited
> e-mail legal notice which can be viewed at:
> http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
> Should you be unable to access the link provided, a copy of the
> legal notice will be e-mailed to you on sending a blank e-mail to
> [EMAIL PROTECTED]
> ==================================================================
> =============
>
> Hi
>
>
> I have downloaded NTOP-3.0pre1 and installed.
>
>
> Interface looks nice but 2 major problems so far
>
>
> This error has re-appeared:
>
>
> Error in log file
>
> Fri Feb 20 15:17:35 2004  **WARNING** RRD:
> rrd_update(/var/ntop/rrd/interfaces/NetFlow-device/hosts//pktSent.rrd)
> error: illegal attempt to update using time 1077283052 when last
> update time is 1077283052 (minimum one second step)
>
>
> In Ntop 2.2.96 this was caused by using the -m option and declaring
> some networks local.  This is not the case now..
>
>
>
> The BIG problem is NTOP-3.0pre1 runs for 10 minutes and crashes with
> no log as to why
>
>
> I was running on Linux 2.4.2 so I recompiled my kernel to 2.6.3 hoping
> it was a memory issue but no luck. (2.2.96 ran fine with white list
> filter)
>
> I am running on a HP xw8000 workstation with 1.7 gig Xeon and 2 gigs
> of RAM.
>
>
> If I switch back to 2.2.96 - it's ok (so what's my point - I like the
> looks of 3)
>
>
> Ntop3 config:
>
>
> Ntop config
>
>
> ntop Configuration
>
>
>
> ntop version.....3.0pre1
>
> Configured on.....Feb 17 2004  7:15:06
>
> Built on.....Feb 20 2004 14:33:37
>
> OS.....i686-pc-linux-gnu
>
> libpcap version.....libpcap version 0.8
>
> Process Id.....32522
>
>
>
> Command line
>
>
> Started as....ntop --user root --db-file-path /var/ntop --domain
> telkom.co.za -p /etc/protocol.list --trace-level 3 --http-server 3000
> -b --no-fc --no-promiscuous --w3c --disable-schedyield
> --skip-version-check
>
> Resolved to....ntop
>
>             --user
>
>             root
>
>             --db-file-path
>
>             /var/ntop
>
>             --domain
>
>             ##########.za
>
>             -p
>
>             /etc/protocol.list
>
>             --trace-level
>
>             3
>
>             --http-server
>
>             3000
>
>             -b
>
>             --no-fc
>
>             --no-promiscuous
>
>             --w3c
>
>             --disable-schedyield
>
>             --skip-version-check
>
>
>
> Command line parameters are:
>
>
> -a | --access-log-file.....(default)   (nil)
>
> -b | --disable-decoders.....Yes
>
> -c | --sticky-hosts.....(default)   No
>
> -d | --daemon.....No
>
> -e | --max-table-rows.....(default)   128
>
> -f | --traffic-dump-file.....(default)   (nil)
>
> -g | --track-local-hosts.....(default)   Track all hosts
>
> -o | --no-mac.....(default)   Trust MAC Addresses
>
> -i | --interface   (effective).....eth0
>
> -j | --create-other-packets.....(default)   Disabled
>
> -k | --filter-expression-in-extra-frame.....(default)   No
>
> -l | --pcap-log.....(default)   (nil)
>
> -m | --local-subnets   (effective).....(nil)
>
> -n | --numeric-ip-addresses.....(default)   No
>
> -p | --protocols...../etc/protocol.list
>
> -q | --create-suspicious-packets.....(default)   Disabled
>
> -r | --refresh-time.....(default)   120
>
> -s | --no-promiscuous.....Yes
>
> -t | --trace-level.....(default)   3
>
> -u | --user.....root (uid=0, gid=0)
>
> -w | --http-server.....(default)   Active, all interfaces, port 3000
>
> -z | --disable-sessions.....(default)   No
>
> -B | --filter-expression.....(default)   none
>
> -D | --domain.....telkom.co.za
>
> -F | --flow-spec.....(default)   none
>
> -K | --enable-debug.....(default)   No
>
> -L | --use-syslog.....daemon
>
> -M | --no-interface-merge   (effective).....(parameter -M set,
> Interfaces separate) No
>
> -N | --wwn-map.....(default)   (nil)
>
> -O | --pcap-file-path.....(default)   /usr/local/var/ntop
>
> -P | --db-file-path...../var/ntop
>
> -Q | --spool-file-path...../var/ntop
>
> -U | --mapper.....(default)   (nil)
>
> -W | --https-server.....Uninitialized --disable-schedYield.....Yes
>
> --disable-instantsessionpurge.....(default)   No
>
> --disable-mutexextrainfo.....(default)   No
>
> --disable-stopcap.....(default)   No
>
> --fc-only.....(default)   No
>
> --log-extra.....(default)   0
>
> --no-fc.....Yes
>
> --no-invalid-lun.....(default)   No
>
> --p3p-cp.....(default)   none
>
> --p3p-uri.....(default)   none
>
> --set-pcap-nonblocking.....(default)   No
>
> --ssl-watchdog.....(default)   No
>
> --w3c.....Yes
>
>
>
>
>
>
>
>

_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to