There should be no problem running ntop w/ an unnumbered interface - I do it all the time.
Try running under gdb - instructions are in docs/FAQ - and capture the failure (bt full) info. -----Burton > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Chris > Beck > Sent: Tuesday, May 25, 2004 8:48 AM > To: [EMAIL PROTECTED] > Subject: RE: [Ntop] Cisco Port mirror and NTOP > > > I had to do the same thing. Just give it some bogus IP and your should be > fine. Unless you know of a way to bring the interface up without > an IP, then > you'll probably have to go this route too. > > -Chris > > -----Original Message----- > From: Tom Greaser [mailto:[EMAIL PROTECTED] > Sent: Tuesday, May 25, 2004 4:28 AM > To: [EMAIL PROTECTED] > Subject: Re: [Ntop] Cisco Port mirror and NTOP > > i have the same setup as you... > i did put a bogos ip on my sniffing interface.. > > also make sure your running your nic at 100 full or what ever you need > it set at.. > > > >>> [EMAIL PROTECTED] 05/24/04 6:49 PM >>> > Hi, I have Ntop running on a Linux box, Fedora Core 1, and I need to > mirror > a port on my Cisco switch, which is no biggie, but when I run Ntop, it > dies, > as the nic that I have it setup to monitor with has no IP. Anyone know > what > I am doing wrong? > > > > Thanks > > > > > > Brian Worrell > > Network Manager > > IU Medical Group > > 317-860-2737 > > > > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://listgateway.unipi.it/mailman/listinfo/ntop
