There's no code behind it in any version - as far as I can tell, it's an artifact in the man page. I had been working on an aggregation option, but the sponsorship seems to have fallen through.
-----Burton > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of > deepak seshadri > Sent: Wednesday, July 14, 2004 2:21 PM > To: [EMAIL PROTECTED] > Subject: RE: [Ntop] Collecting data by subnets and not hosts > > > Hi John, > Thank you for the information. Any idea if this switch will be a part of > ntop package for fedora core in the future? > > Regards, > Deepak > > > ----Original Message Follows---- > From: "John Atkinson" <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > To: <[EMAIL PROTECTED]> > Subject: RE: [Ntop] Collecting data by subnets and not hosts > Date: Wed, 14 Jul 2004 10:47:13 -0700 > > Deepak, > > I don't think -C is implemented for all platforms. I discovered it's not > available in the Win32 build myself. > > John Atkinson > > -----Original Message----- > From: deepak seshadri [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 14, 2004 10:04 AM > To: [EMAIL PROTECTED] > Subject: RE: [Ntop] Collecting data by subnets and not hosts > > > Hi Chris, > Today I tried to add the -C switch but ntop does not accept it. I > am running > ntop v3.0 on Fedora Core 2. I am pretty sure I have the latest version of > NTOP. I checked the man page on the website, it does not mention anything > about the -C switch. If I do a ntop --help, even that doesn't show the -C > switch. The only place I found this was on the man page that came with the > software package. Am I doing something wrong here? This is how I started > NTOP with the -C switch and it did not work: > > ntop -o -i eth1 -m 192.168.10.0/24 -r 30 -u root -M -C network > > If I use just -C even that didn't work. > > What am I doing wrong here? > > Thank you in advance. > > Deepak > > ----Original Message Follows---- > From: Chris Beck <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Subject: RE: [Ntop] Collecting data by subnets and not hosts > Date: Tue, 13 Jul 2004 11:30:07 -0700 > > Check out the manpage about the -C switch to see if that's what you need. > > -Chris > > -----Original Message----- > From: Deepak Seshadri [mailto:[EMAIL PROTECTED] > Sent: Tuesday, July 13, 2004 11:25 AM > To: [EMAIL PROTECTED] > Subject: [Ntop] Collecting data by subnets and not hosts > > Hello everybody, > Could someone tell me how to configure NTOP to collect data for an entire > subnet (local) and not by hosts in that subnet. For instance, I want the > total traffic, ports opened, website accessed etc for the subnet > 192.168.10.0/24 and not hosts (say, 192.168.10.54 etc). > > Thank you, > Deepak > > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop > > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop > > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://listgateway.unipi.it/mailman/listinfo/ntop
