Title: RE: [Ntop] FreeBSD (was no subject)
There were some FreeBSD problems WRT threading fixed in 4.10 which is probably what you are remembering.
 
Read Luca's paper - he found that Windows had fewer drops than Linux, but Linux fewer than FreeBSD.  For a host of other reasons, any minimal Linux install (you just don't need all the cruft most of 'em install) is probably the best choice.
 
Gentoo, RedHat, Fedora, SuSE...  take your pick.
 
-----Burton
 
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Joe Carder
Sent: Monday, November 01, 2004 9:13 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [Ntop] FreeBSD (was no subject)

Yeah I am working on rebuilding my box for this reason as well.  And after reading the back traffic on the list I somehow read something wrong and got the impression 4.x was good, but I guess this isn't the case.  What would be the best OS to load for packet capturing?  I have a very similar network load, but am running a 512 meg on 2.5 P4.


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Burton M. Strauss III
Sent: Monday, November 01, 2004 8:09 AM
To: [EMAIL PROTECTED]
Subject: [Ntop] FreeBSD (was no subject)

Read the history re FreeBSD and packet drops - it's in the back traffic.
4.x is trouble.  Especially on inadequate hardware.  5.x isn't much better.

-----Burton


> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> [EMAIL PROTECTED]
> Sent: Monday, November 01, 2004 3:08 AM
> To: [EMAIL PROTECTED]
> Subject: [Ntop] (no subject)
>
>
>
>
> Hi all
>
> I've been looking at using freebsd 4.10 and NTOP(v3) to monitor a
> 100mb wan
> connection.  The traffic averages at about 8mb/s and occasionally peaks at
> 44mb/s.
>
> I'll be  honest in that the box I'm running it on isnt that great
> (pII 450Mhz
> and 256mb RAM).
>
> What confuses me at the moment is the amount of drops attributed
> to libpcap -
> according to the web server I'm dropping anything from 85% (the
> lowest I've seen
> it) up to 200%(not sure how?).  And these are at times when
> traffic throughput
> is only around 6mb/s.  The amount of drops due to ntop is always
> 0%.  I've tried
> turning of rrdtool as well and set pcap to non blocking.
>
> Ok, you could simply argue that the machine is junk and I'm
> wasting my time -
> except that ntop is using less than a third of the systems
> utilisation and when
> I run snort on the same interface which also uses libpcap I loose
> NO packets.
> Absolutely nothing.  I've read from previous posts that libpcap
> occasionally
> fibs about its stats, but why fib to one application and not the other?
>
> So... any ideas on why the libpcap performance when used by ntop is terrible
> compared to that of snort?  I've tried 2 different machines and 3
> different Nics
> (all different manufacturers - intel, 3com and netgear) and I
> still get similar
> results.
>
> Any suggestions greatfully received.
>
> Kind Regards
>
> Ross
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
> _______________________________________________
> Ntop mailing list
> [EMAIL PROTECTED]
> http://listgateway.unipi.it/mailman/listinfo/ntop
>

_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to