Sounds like the same problem I have with Ntop 3.0. The server it runs on is a dual-processor G4 with 640 MB of RAM. It'll run perfectly for anywhere from 30 minutes to 8-12 hours, but will spontaneously die with no error message, not even a core file.
 
Average throughput I see on the spanned port (as Ntop reports) is easily about 3 Mbit/s.
 


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of teasy
Sent: Friday, November 05, 2004 5:13 AM
To: [EMAIL PROTECTED]
Subject: [Ntop] NTOP on big gateways

Hi NTOP List,
 
I've successfull installed NTOP and anything is running fine if the network bandwidth is at a low level (< 2-3 MBit/s). Starting from 2-3 MBit/s NTOP dies after aprox. 30 Minutes without any error message in the logs.
 
I don't know if this is related to the bandwidth monitored but it looks like this to me. I tried to disable things so my current config looks like:
 
--no-mac
--no-promiscuous
--disable-decoders
--track-local-hosts
-m (two local networks)
--B (filter for two networks)
--no-interface-merge
--trace-level 4
 
and listening on one interface. If I enable
 
--disable-sessions
 
it runs for some hours at low bandwidth (up to 5 MBit/s) an crashes then, even without a error in the logs.
 
I am running NTOP 3.0 on GNU/Linux GLIBC 2.3, LibPCAP 0.8.3, basicaly a Fedora Core 2 installation. There is 1 gb of mem available for ntop and ntop never used more than 180 mb.
 
The session information is not required by me (also it would be nice to have) but it should be able to handle a bandwidth of 32 - 56 mbit/s.
 
Anyone some idea where I can look at (increase debug output, some usefull configuration flags, other troubleshooting ideas...)...
 
Thx a lot...!
 
Kind regards,
Marcus
 


Gesendet von Yahoo! Mail - Jetzt mit 100MB kostenlosem Speicher
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to