When I check the Summary|Traffic display on my Ntop 3.1 box here, I sort the data by traffic so as to display the highest utilization hosts at the top.
For some reason, the host being displayed at the very top is NOT displaying correct numbers. I think there's either a print formatting issue or a variable overflow. Here's an example: HOST DOMAIN DATA TCP UDP [etc etc] foo home 93.9&| 0 2.5 MB 0 bar home 63.5 GB| 19.1 % 63.5 GB 67.3 KB zot home 31.1 GB| 9.4 % 31.1 GB 516.4 KB Clear, the host "foo" should not be listed near the top, if the data number is accurate. But also clearly, it's NOT accurate. It actually displays with an ampersand, and percentile display is completely wrong. This is on a YellowDog 3.0 system running on a G4 powermac. So it's PPC architecture. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Jeff Mercer - ITS Security & BTINet Systems Administration "This electronic message transmission contains information from the office of Jeff Mercer, ITC^DeltaCom, Inc., which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this electronic transmission in error, please notify us by telephone 919-863-7257 or by electronic mail [EMAIL PROTECTED] immediately." _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
