Nope it's not wrong.  Remember that once you create the rrd, the rings are
not altered by subsequent changes to the plugin configuration - that only
affects new rrd files.

But all the data in the rings are normalized per-second value OVER THE SPAN
of the slot.

See the example on pg 7, "Our data 'rows' are now (remember rrd converts the
absolute numbers into a per second value):"

If you look at the dumps (sample starts on pg 10), you'll also see this.


Once data is aggregated into the RRAs, that's the best granularity you are
going to get.  If you create a graph which tries for more granular data, you
just get wider bars.


-----Burton




-----Original Message-----
From: Farhan Ali Khan [mailto:[EMAIL PROTECTED] 
Sent: Tuesday, February 15, 2005 11:28 AM
To: [email protected]; Burton Strauss
Subject: Re: [Ntop-dev] RRD Graphs Resolution

Hi,
I've already read all that stuff.
By default the dumpInterval is 5 minutes, so the label on graphs that states
bytes/sec or packets per second is wrong! (I had pointed that out earlier as
well). It should be bytes/5 min or packets/5 min. 
[bytes/dumpInterval, etc].
My question is simple.
Is it possible that the dumpInterval remains 5 minutes and we can get graph
that plots values according to per second? so that the label bytes/sec or
packets/sec holds true...

Thanks
Regards
Farhan Ali Khan


On Tue, 15 Feb 2005 11:02:05 -0600, Burton Strauss <[EMAIL PROTECTED]>
wrote:
> Did you read the paper @ SourceForge?  The specifics of RRAs used for 
> storage begins on page 5.  That's the data that's out there.
> 
> Remember, changing settings only affects NEW .rrd files - the old ones 
> have already had their rings collected.
> 
> -----Burton
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On 
> Behalf Of Farhan Ali Khan
> Sent: Tuesday, February 15, 2005 9:39 AM
> To: [email protected]; Burton Strauss
> Subject: Re: [Ntop-dev] RRD Graphs Resolution
> 
> Hi,
> I have changed the setting to 30 seconds currently sucessfully, i have 
> read the docs.
> Now , a single bar in the graph represents data for 30 secs interval 
> but I want to see graph in bytes/second, so Is there any way I can 
> divide the data for 30 secs into per second so that in graph each bar 
> represents data on per second basis while in the actual rrd db the 
> data is still stored for 30 seconds.?
> 
> Regards
> 
> On Tue, 15 Feb 2005 09:15:09 -0600, Burton Strauss 
> <[EMAIL PROTECTED]>
> wrote:
> > Read the paper on SourceForge - it explains RRAs.  Then read the 
> > docs for rrdtool.  Once you understand this, you can use the rrd 
> > plugin setting to change the resolution from the 5m default to do what
you want.
> >
> > -----Burton
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
> > On Behalf Of Farhan Ali Khan
> > Sent: Monday, February 14, 2005 6:22 PM
> > To: [email protected]
> > Subject: [Ntop-dev] RRD Graphs Resolution
> >
> > Hi,
> >
> > Currently the RRD DB is updated every 5 minutes (default value) and 
> > the graphs show the values plotted for 5 minute interval.
> > Is it possible that I can divide the 5 minute interval value to get 
> > the per second and that the bars on the graph are for the per second
> value?
> >
> > Thanks
> > Regards
> > Farhan Ali Khan
> > _______________________________________________
> > Ntop-dev mailing list
> > [email protected]
> > http://listgateway.unipi.it/mailman/listinfo/ntop-dev
> >
> > _______________________________________________
> > Ntop-dev mailing list
> > [email protected]
> > http://listgateway.unipi.it/mailman/listinfo/ntop-dev
> >
> _______________________________________________
> Ntop-dev mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop-dev
> 
> _______________________________________________
> Ntop-dev mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop-dev
>

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to