-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

Over the last two weeks I am working with / testing NTOP. I experience
some strange problems/behavior with NTOP in combination with Netflow on
our router.
I think I have configured the router (Cisco 6509 with native IOS
(V12.1)) correctly. The router send out his netflow packets, but the
NTOP application does not count all these packets.

I have configured the router is such a way that the switching engine of
the router sends out V5 netflow, and the software routing engine send
out V1 packets.

When I watch the counters of the NTOP-netflow plugin I see that V1 flow
counters match (about) those of the counters on the router
(645,384<->733917). But it looks like NTOP misses more than 85% of the
V5 flows (466,514<->4011701).

The 'Network Load' graph also does not represent our network load.
The NTOP graph shows a load average about < 50Mbps (some peaks between
100 and 250Mbps). When I count about all outgoing traffic of our router
I get an average of 750Mbps.

When I am using 'Netflow-tools' on the same host I count all Netflow
packets the router sends. Even the sum of the flow-size correspond the
average throughput.

I am running NTOP-cvs (latest version), but NTOP standard release (3.1)
shows the same behavior.


Can someone give me a hint to solve this problem?


+++++++++++ntop-netflow-plugin
(reset of the counters are -nearly- on the same time)

Flow Senders    y.y.4.2 [43,014 pkts]
Number of Packets Received      43,014
Number of Packets with Bad Version      0
Number of Packets Processed     43,014
Number of Valid Flows Received  1,111,898
Average Number of Flows per Packet      10.8
Number of V1 Flows Received     645,384
Number of V5 Flows Received     466,514
Number of V7 Flows Received     0
Number of V9 Flows Received     0
Discarded Flows
Number of Flows with Zero Packet Count  0
Number of Flows with Zero Byte Count    0
Number of Flows with Bad Data   0
Number of Flows with Unknown Template   0
Total Number of Flows Processed         1,111,898


++++++++++++ cisco 6509 (native IOS)
sho ip flo ex
Flow export is enabled
  Exporting flows to x.x.x.12 (2055)
  Exporting using source interface Vlan116
  Version 1 flow records
  733917 flows exported in 30580 udp datagrams
  0 flows failed due to lack of export packet
  0 export packets were sent up to process level
  0 export packets were dropped due to no fib
  0 export packets were dropped due to adjacency issues
  0 export packets were dropped due to fragmentation failures
  0 export packets were dropped due to encapsulation fixup failures
  0 export packets were dropped enqueuing for the RP
  0 export packets were dropped due to IPC rate limiting
sho mls nde
 Netflow Data Export enabled
 Exporting flows to x.x.x.12 (2055)
 Exporting flows from y.y.4.2 (49744)
 Version: 5
 Include Filter not configured
 Exclude Filter not configured
 Total Netflow Data Export Packets are:
    138372 packets, 0 no packets, 4011701 records
 Total Netflow Data Export Send Errors:
        IPWRITE_NO_FIB = 0
        IPWRITE_ADJ_FAILED = 0
        IPWRITE_PROCESS = 0
        IPWRITE_ENQUEUE_FAILED = 0
        IPWRITE_IPC_FAILED = 0
        IPWRITE_MTU_FAILED = 0
        IPWRITE_ENCAPFIX_FAILED = 0


- --

Groeten,

Roel H.Hoek, SeniorNetworkmanager
Dienst Informatietechnologie, Bibliotheek en Educatie (ITBE)
Universiteit Twente,  Postbus 217,  7500 AE  Enschede
kmr SP 422, telefoon: 053 - 489 4598,  fax: 053 - 489 2383
e-mail: [EMAIL PROTECTED] http://www.utwente.nl/itbe

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCZ4BoJwlRSGnYBcYRApV2AJwNtumrQrL3ky5ikD7YhS6CnvqgJQCfU8wP
ZTKxcRv+3a/zJHuw6Rq6x3U=
=vzTW
-----END PGP SIGNATURE-----
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to