Router side config:
I have done only version 9 and these are the basic configs
It depends on the Router some line cards support only sampling mode and
other full flow
ip flow-cache timeout active 10 (default is 30 mins)
ip flow-export version 9
ip flow-export destination x.x.x.x (udp port) (ip address of the
collector and port number it is listening)
ip flow-sampling-mode packet-interval 10 (only required for sampling
only line cards)
Interface
ip route-cache flow (full flow)
or
ip route-cache flow sampled (input | output) (for linecards that support
only sampling )
Netflow solution guide:
http://www.cisco.com/en/US/products/sw/netmgtsw/ps1964/products_implemen
tation_design_guide09186a00800d6a11.html
Thanks
Chander
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Anthony David
Sent: Monday, May 16, 2005 7:08 PM
To: [email protected]
Cc: [EMAIL PROTECTED]
Subject: [Ntop] Fwd: ntop netflow setup
Hi All
I received this on the solaris support email address, however I figured
this is a question for a wider audience. Any people able to offer some
advice to Steve?
Regards
Anthony David
Begin forwarded message:
> From: "Davenport, Steve M." <[EMAIL PROTECTED]>
> Date: 17 May 2005 5:17:36 AM
> To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
> Subject: ntop netflow setup
> Return-Path: <[EMAIL PROTECTED]>
> Received: from jake.unipi.it (jake.unipi.it [131.114.21.22]) by
> adavid.com.au (8.12.10/8.12.10) with ESMTP id j4GJICgs007262 for
> <[EMAIL PROTECTED]>; Tue, 17 May 2005 05:18:16 +1000
> Received: from mc.utmck.edu (chewy.mc.utmck.edu [165.6.132.40]) by
> jake.unipi.it (8.12.11/8.12.10) with ESMTP id j4GJI426011601 for
> <[EMAIL PROTECTED]>; Mon, 16 May 2005 21:18:04 +0200
> Received: from ([165.6.132.18]) by chewy.mc.utmck.edu with ESMTP id
> KP-GCN49.9072105; Mon, 16 May 2005 15:17:41 -0400
> Received: by msexch4.mc.utmck.edu with Internet Mail Service
> (5.5.2653.19) id <H6APAQW2>; Mon, 16 May 2005 15:17:41 -0400
> Message-Id:
> <[EMAIL PROTECTED]>
> Mime-Version: 1.0
> X-Mailer: Internet Mail Service (5.5.2653.19)
> Content-Type: text/plain; charset="iso-8859-1"
> X-Virus-Scanned: clamd / ClamAV version 0.70, clamav-milter version
> 0.70j
> X-Spam-Status: No, hits=0.0 required=5.0 tests=none autolearn=no
> version=2.63
> X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on
> jake.unipi.it
>
> Hello,
>
> I have ntop running on a Solaris 8 management system. I would now like
> to setup ntop to accept net flow data from Cisco routers and be able
> to see something like a top 10 talker list. Is this possible and if so
> can you point me toward a configuration guide for the router and
> nettop?
>
> Thanks,
> Steve
>
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
