Which version of rrdtool is this? The frozen version included w/ ntop 3.1 is 1.0.50, while the 'current' rrdtool cvs is 1.2.10 (IIRC, it's been changing quite rapidly up until the last couple weeks).
rrd files themselves should be portable, but beware of 1.2.x which is rrd v3. This makes files which are not writable by the older version. What's wrong w/ them? -----Burton -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, July 20, 2005 11:48 PM To: [email protected] Subject: [Ntop] Ntop rrdplugin graphing not correct - can I use std rrdtool? Hi, Have a problem ntop 3.1 on Sol9(I386) where the history graphs from rrdplugin are incorrect. Looks to be a problem specific to this platform (yes, perhaps I will go to 10 to see if there's a difference, but as the ntop box is in production there will have to be a project to upgrade.... sigh). None of the standard ntop graphs are impacted. Have recompiled ntop, gd, png. Have had a wander through the code with no real luck (where are the scales set?). Some of the graphs have bar color from top to bottom (outside actual graph area). So there is obviously a version incompatibility that has not been picked up by configure. However, rrdtool installed on the same box seems to graph OK. Any way to use the std rrdtool? Not worth killing over, if not, I'll just move to Sol8 or Sol10. thanks Dave Callaghan _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
