To be more specific of what I want to achieve,
I like to have following web page only list out NIS clients connected to myhost(NIS server).

http://myhost:3000/hostsInfo.html

The goal is to find out how many nis clients are currently connected to a NIS server.
Is this goal achievable by ntop ?



tj


From: "T.J. Yang" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: [email protected]
Subject: RE: [Ntop] Can ntop mointor NIS connection ?
Date: Sun, 14 May 2006 21:48:16 -0500


From: "Burton Strauss" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: <[email protected]>
Subject: RE: [Ntop] Can ntop mointor NIS connection ?
Date: Fri, 12 May 2006 16:18:41 -0500

Well, if it's a layer 3 protocol you can add it to the list like Jac says
(although I think he's got is Is and Fs confused, NIS != NFS).

I am using ntop-2.1.3(a bit old i know)  and here is the command I ran

ntop -u myaccunt -p "NIS=sunrpc"

I am hoping to ONLY monitor NIS traffic on eth0 but the problem is that I am getting other protocols statistics.

Follwing are some infos
[myhost ] ls -lrt
total 100
-rw-r-----    1 root     root        12517 May 14 21:39 prefsCache.db
-rw-r-----    1 root     root        12288 May 14 21:39 LsWatch.db
-rw-r-----    1 root     root        12288 May 14 21:39 hostsInfo.db
-rw-r-----    1 root     root        12437 May 14 21:39 ntop_pw.db
-rw-r-----    1 root     root        25131 May 14 21:45 dnsCache.db
-rw-r-----    1 root     root        12363 May 14 21:45 addressCache.db
[ilad409 ] grep 111 /etc/services
sunrpc          111/tcp         portmapper      # RPC 4.0 portmapper TCP
sunrpc          111/udp         portmapper      # RPC 4.0 portmapper UDP
[myhost]

anypointer where I did wrong ?


tj

Reason I asked is that there are so many protocols and so few letters -
there's tons of confusion everytime somebody just gives the abrev.

-----Burton

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of T.J.
Yang
Sent: Friday, May 12, 2006 8:32 AM
To: [email protected]
Subject: RE: [Ntop] Can ntop mointor NIS connection ?

>From: "Burton Strauss" <[EMAIL PROTECTED]>
>Reply-To: [email protected]
>To: <[email protected]>
>Subject: RE: [Ntop] Can ntop mointor NIS connection ?
>Date: Fri, 12 May 2006 07:47:05 -0500
>
>Um... What's NIS?

Hi, Burton
Should I say Yellow Page instead ?

http://www.linux-nis.org/nis/ypserv/

tj

>
>-----Burton
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
>T.J.
>Yang
>Sent: Friday, May 12, 2006 5:29 AM
>To: [email protected]
>Subject: [Ntop] Can ntop mointor NIS connection ?
>
>Hi, there
>Execuse me if the answer is in the documenation somewhere.
>I read through the FAQ but I cann't the answer.
>
>My goal is to find a automatic/scripted  way of recording how many NIS
>clients are connected to a NIS server.
>
>Can ntop monitoring NIS connection ?
>
>
>T.J. Yang
>
>
>_______________________________________________
>Ntop mailing list
>[email protected]
>http://listgateway.unipi.it/mailman/listinfo/ntop
>
>_______________________________________________
>Ntop mailing list
>[email protected]
>http://listgateway.unipi.it/mailman/listinfo/ntop


_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop


_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop


_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to