Dear Burton, I have checked interfece merging.First of all it is having only one interface. Even I tried disabled the merging. But still it does not shows sent packects. One more thing how can I search archives at http://listgateway.unipi.it/pipermail/ntop/
Thanks and Regards, Santosh K On Sun, 16 Jul 2006 07:23:54 -0500, Burton Strauss wrote > Are you using a tap? If so, remember that you need to feed both RX > and TX into ntop and configure ntop so it merges interfaces (there > are options settings which disable merge, if so you will see that in > the configuration page, info.html and will see the Switch NIC option > in the menus). > > -----Burton > > (Please note that I am speaking only as an individual and not as a > representative of my employer) > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Santosh Laxman Kyadari Sent: Sunday, July 16, 2006 2:59 AM To: [email protected] > Subject: [Ntop] Tot. Traffic Sent by a host is not correct (infact > it is O) > > Dear All, > Hi I am santosh. I am using Ntop from quit long time. Now am facing > a little prblem, Which I had not observed ealier. My company is > having nearly 1500 machines connected in the internet. My brief > network is as shown below > > Network > 172.168.49.0 > \ > \ > \ > Network \ > 172.168.50.0 --- Router 1 ---- Router 2 ----Internet > / | > / | > / | > Network / | > 172.168.51.0 Ntop Machine > 172.168.1.34:3000 > > I am monitoring all the internet traffic using ntop. In the host > info page > i.e http://172.168.1.34:3000/172.168.49.76.html, My ntop shows the data > received from the internet correctly in the above page. If I > download any data from the internet it reflects in Tot. Traffic Rcvd > properly. But if I send any data to the internet it does not reflect > in Tot. Traffic Sent. In fact it shows O . I am not understanding > the problem why it is not showing any sent data for the host > properly. I was usnig ntop 3.1. TO resolve this problem I have > loaded Ntop 3.2 also. I have even tried loading differnt OS and > diffent machines. But no luck. It does not show the data sent by > host properly(correctly). > > If anybody knows any clue about the solution, I request them to > reply to me. My sincere thanks to guide to the solution. > > Regards, > > Santosh K > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop Regards, Santosh K _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
