Hi, I extensively have used ntop with Linux bridging and I never experimented such problem. In some cases I got this problem and I solve exchanging the NIC.
Regards, Rivalino -----Mensagem original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nome de Jiang Liu Enviada em: quarta-feira, 6 de dezembro de 2006 03:56 Para: [email protected] Assunto: [Ntop] question about ntop dropping large amount packages and not updating itself Hi I have a question about the ntop installation on my BrazilFW box (a small firewall linux distribution). This is what I observed: the ntop can run correctly on the linux box, however, it only shows the first couple hundreds of packages, then it stops collecting packets. When I look at the trafficstats.html, it shows that there are large amount of dropped packets from libpcap, and total received (ntop) is constant all the time. It seems ntop doesn't read the packet since all the packets are dropped by libpcap. BTW, this linux box is configured as a bridge (although I don't think it will affect anything, since I have tested ntop on another linux bridge based on CentOS and that works fine). Any suggestions are appreciated. Thanks, Jiang _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
