Bump
I've spent the last two days upgrading all my packages from the ports collection - including X. This was the result of installing the ntop 3.3.0? BSD port - it got a long way through the process and died with some X error. So, I ran "portupgrade" and followed all the special instructions on upgrading Xorg/XFree86 and 320 packages and MANY MANY hours later it was done. So, I install the 3.3.0 port again and run it, but something is broke. It only using a few CPU cycles while the netflow interface queues are maxed out and the http server doesn't reply. So - I move back to the 3326 release from SVN. Run everything fresh again, autogen.sh, gmake, and gmake install. All is goes well, BUT STILL NO GRAPHICS! WTF? I can post a 100 pages (or more) of output, but I'd rather narrow it down a little. Any help would be appreciated - and I'll provide whatever you need. Thanks! Gary ________________________________ From: Gary Gatten Sent: Tuesday, October 16, 2007 6:49 PM To: '[email protected]' Subject: RE: [Ntop] Pretty pictures missing after upgrade to 3.3.3 When I access the ntop webserver using FireFox there are no errors. I get the nTop graphic logo and a little pencil or something in the interface that links to the ChangeName. However, in IE I get no graphics at all and a bunch of "Page cannot be displayed" in the frames where the charts and graphics should be. I also get this error at the top: "Please enable make sure that the ntop html/ directory is properly installed" I just deleted all nTop stuff I know of and ran gmake install again. I checked the content of ...ntop/html and it all looks good and perms are OK. Going home now. Hopefully in the morning someone will have a fix for me! Gary ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary Gatten Sent: Tuesday, October 16, 2007 5:57 PM To: [email protected] Subject: RE: [Ntop] Pretty pictures missing after upgrade to 3.3.3 OK - I remember the first time I did the make process (autogen.sh, gmake, gmake install) it spewed some message about X11 Base. Per instructions I added a line to the /etc/make.conf - maybe I told it X wasn't there? I wiped out my install directory and got the source again from SVN. Running the make process now with the X11 line removed from make.conf and now there's no error? But alas, still no graphics / images. I now there's something I prolly need to change in the configure file - but no clue what. Guess I'll keep digging. Gary ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary Gatten Sent: Tuesday, October 16, 2007 4:27 PM To: [email protected] Subject: RE: [Ntop] Pretty pictures missing after upgrade to 3.3.3 PS: When I upgraded I didn't delete or uninstall anything from 3.2.1. I never had rrdtools installed, but since 3.3.3. didn't include it I installed rrdtools 1.2.23 from the FreeBSD ports. Reviewed log file and only errors are concerning snmp and xmldump plugins being compiled for 3.2.1 and not 3.3.3. Gary ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary Gatten Sent: Tuesday, October 16, 2007 3:53 PM To: [email protected] Subject: [Ntop] Pretty pictures missing after upgrade to 3.3.3 Just upgraded from 3.2.1 to 3.3.3 from SVN. Compiled cleanly ( I think) on FreeBSD 6.1 My pretty Pie charts are now missing; such as Summary > Traffic. All the text is there - but no graphics. I've browsed the log files and didn't see anything that would refer to this. I am not using rrd yet and noticed the "Network Load" is missing - but there's a message below that says it should be missing unless rrd is active and working correctly. I'll keep snooping - but any help would be appreciated. Gary ======================================================================== === "This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system." ======================================================================== === "This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system." ======================================================================== === "This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system." =========================================================================== "This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system."
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
