John
can you please mail (me perhaps)
1. a dump (pdf, jpeg or so) of the netflow configuration page
2. a dump of a few netflow packets (full size please)
Thanks Luca
On Jan 11, 2009, at 3:45 AM, John O'Callaghan wrote:
Tried both v5 & v9. I've set the active timeout to 1 minute and
inactive to 15
seconds but no joy.
2009/1/10 John O'Callaghan <[email protected]>
Gary Gatten <Ggatten <at> waddell.com> writes:
>
>
>
> Check flow version and flow timeout settings. V5 works well and I
set the
timeout as low as possible for most realitime data
>
> From: ntop-bounces <at> unipi.it To: ntop <at> unipi.it Sent: Sat
Jan 10
09:50:17 2009Subject: [Ntop] NetFlow stats not displayed on ntop v.
3.3.9
> Hi all,
> I want to monitor netflow only and have enabled netflow on my 7200
and
exported to the ntop host on port 2055. This is working, i can see
the udp
traffic on the ntop host using tcpdump and i have confirmed that the
virtual
netflow device is listening on 2055.
>
> The plugin is configured correctly, enabled and the reporting
interface
switched to the netflow device yet I do not see any stats at all
with the
exception of Network Flows which shows accumulating packets &
traffic for
NetFlow.
>
> If I switch to eth0 I do see stats for traffic on that interface
so I don't
think its a RRD or permissions issue.
>
> Can someone please point me in the right direction?
>
>
>
> Many thanks,
>
> Eric
>
>
>
>
>
>
> "This email is intended to be reviewed by only the intended
recipient
> and may contain information that is privileged and/or confidential.
> If you are not the intended recipient, you are hereby notified that
> any review, use, dissemination, disclosure or copying of this email
> and its attachments, if any, is strictly prohibited. If you have
> received this email in error, please immediately notify the
sender by
> return email and delete this email from your system."
>
>
> _______________________________________________
> Ntop mailing list
> Ntop <at> unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>
Tried both v5 & v9. I've set the active timeout to 1 minute and
inactive to 15
seconds but no joy.
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
