if you want to set 2 different interfaces you have to set different port for collecting data. hence you have to configure the port on the cisco side. Yuri
On 02/05/2009 02:39 PM, Gary Gatten wrote: > What udp ports are your routers exporting to? The same - 2055? > > ------------------------------------------------------------------------ > *From*: [email protected] > *To*: [email protected] > *Sent*: Thu Feb 05 06:50:29 2009 > *Subject*: [Ntop] Multiple Netflow sources problem > > Hello! > > We use Ntop 3.3.9.3 on a Windows 2003 server. The server gets Netflow > data from two Cisco routers: their ip address is 192.168.18.252 > (r-guest) and 192.168.18.253 (r- customer). > > Our problem is that I get data from both routers if I select the > r-customer interface, and get no data if I select the other one. I am > quite sure that both routers send Netflow data to the Ntop server. > > Is this a feature, or I have misconfigured something? > > Kind regards, > Zoltan KOVACS > > "This email is intended to be reviewed by only the intended recipient > and may contain information that is privileged and/or confidential. If > you are not the intended recipient, you are hereby notified that any > review, use, dissemination, disclosure or copying of this email and its > attachments, if any, is strictly prohibited. If you have received this > email in error, please immediately notify the sender by return email and > delete this email from your system." > > > ------------------------------------------------------------------------ > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Yuri Francalacci E-Mail: [email protected] Internet: http://www.ntop.org/ *** Esse Quam Videri -- To Be, Rather Than To Seem *** -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
