First I would recommend finding a binary for your OS and see if it works OK for you with whatever options the package builder used. If not, then I guess you have to compile.
I do not know what the current fixed/stable/patched whatever revision of 3.3.10 is. The link on ntop.org for stable source is: http://freshmeat.net/projects/ntop/ I had to get rev 3780 from the ntop SVN server: svn co –r 3780 https://svn.ntop.org/svn/ntop/trunk/ntop 3780 has it’s share of issues, but it’s the only one so far I could actually get built and installed. I’m sure some of the issues are my environment and ignorance, but it kinda sorta works so I’m sticking with it – for now at least! G ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Chor Keung Li Sent: Wednesday, June 24, 2009 1:08 PM To: [email protected] Subject: [Ntop] Re： ntop 3.3.10 compilation error I downloaded the source from sourceforge.net, the version is ntop-3.3.10. Thanks! Eddie -------------------- Where did you get the source? ________________________________ From: ntop-bounces at unipi.it <http://listgateway.unipi.it/mailman/listinfo/ntop> To: ntop at unipi.it <http://listgateway.unipi.it/mailman/listinfo/ntop> Sent: Wed Jun 24 05:22:29 2009 Subject: Re: [Ntop] Re? ntop 3.3.10 compilation error Hi, My autogen.sh is below, Thanks! ====================================== Starting ntop automatic configuration system v.0.2.3 Please be patient, there is a lot to do... 1. Testing gnu tools.... libtool ..... 2.2.4 .... ok automake .... 1.10.1 .... ok autoconf .... 2.63 .... ok 2. Preparing for libtool .... libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. libtoolize: copying file `./ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. .... done 3. Create acinclude.m4, local definitions for automake ... .... done 4. Running aclocal to create aclocal.m4 ... acinclude.m4:236: the serial number must appear before any macro definition configure.in:169: warning: LTOPTIONS_VERSION is m4_require'd but not m4_defun'd acinclude.m4:263: LT_INIT is expanded from... acinclude.m4:299: AM_PROG_LIBTOOL is expanded from... configure.in:169: the top level configure.in:169: warning: LTSUGAR_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTVERSION_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTOBSOLETE_VERSION is m4_require'd but not m4_defun'd .... done 5. Running autoheader to create config.h.in ... configure.in:169: warning: LTOPTIONS_VERSION is m4_require'd but not m4_defun'd acinclude.m4:263: LT_INIT is expanded from... acinclude.m4:299: AM_PROG_LIBTOOL is expanded from... configure.in:169: the top level configure.in:169: warning: LTSUGAR_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTVERSION_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTOBSOLETE_VERSION is m4_require'd but not m4_defun'd .... done 6. Running automake to create Makefile.in ... configure.in:169: warning: LTOPTIONS_VERSION is m4_require'd but not m4_defun'd acinclude.m4:263: LT_INIT is expanded from... acinclude.m4:299: AM_PROG_LIBTOOL is expanded from... configure.in:169: the top level configure.in:169: warning: LTSUGAR_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTVERSION_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTOBSOLETE_VERSION is m4_require'd but not m4_defun'd configure.in:105: installing `./config.guess' configure.in:105: installing `./config.sub' Makefile.am:121: compiling `main.c' with per-target flags requires `AM_PROG_CC_C_O' in `configure.in' .... done 7. Running autoconf to create configure ... configure.in:169: warning: LTOPTIONS_VERSION is m4_require'd but not m4_defun'd acinclude.m4:263: LT_INIT is expanded from... acinclude.m4:299: AM_PROG_LIBTOOL is expanded from... configure.in:169: the top level configure.in:169: warning: LTSUGAR_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTVERSION_VERSION is m4_require'd but not m4_defun'd configure.in:169: warning: LTOBSOLETE_VERSION is m4_require'd but not m4_defun'd configure:5229: error: possibly undefined macro: m4_ifval If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. configure:8103: error: possibly undefined macro: _LT_SET_OPTIONS configure:8103: error: possibly undefined macro: LT_INIT .... done 8. Running ./configure ... I am going to run ./configure with no arguments if you wish to pass any to it, please specify them on the ./autogen.sh command line. Welcome to ntop, Version 3.3.10 copyright (c) 1998-2009 Luca Deri <deri at ntop.org <http://listgateway.unipi.it/mailman/listinfo/ntop> > Configuration script version v3.3.10-06-01-2009 ************************************************************************ * * * NOTICE: I know you're used to ignoring output from ./configure * * * * ntop has a lot of complexity and interdependences. * * * * Please, please AT LEAST read the stuff in these boxes! * * * *>>> The ACTION taken by ./configure is shown prefixed with '>>>' * * * * If that ACTION is unacceptable, * *??? Steps to take to fix the problem are shown, prefixed with '???' * * * ************************************************************************ NOTE: To enable additional, debugging messages during the ./configure execution, do this before running ./configure: $ export NTOPCONFIGDEBUG=yes Configuring ntop according to your request(s): ./configure checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes ./configure: line 5147: LTOPTIONS_VERSION: command not found ./configure: line 5148: LTSUGAR_VERSION: command not found ./configure: line 5149: LTVERSION_VERSION: command not found ./configure: line 5150: LTOBSOLETE_VERSION: command not found checking for a sed that does not truncate output... /bin/sed ./configure: line 5227: syntax error near unexpected token `lt_decl_varnames,' ./configure: line 5227: `lt_if_append_uniq(lt_decl_varnames, SED, , ,' Could you post the whole autogen.sh output? Yuri On 06/24/2009 10:01 AM, Chor Keung Li wrote: > Hi all, > > Anyone have idea on the error, I'm still struggling on it. > Thanks! > > ------------------------------------------------------------------------ > *寄件人﹕* Chor Keung Li <ckat512 at yahoo.com.hk > <http://listgateway.unipi.it/mailman/listinfo/ntop > <http://listgateway.unipi.it/mailman/listinfo/ntop> > > > *收件人* ntop at unipi.it <http://listgateway.unipi.it/mailman/listinfo/ntop > <http://listgateway.unipi.it/mailman/listinfo/ntop> > > *傳送日期﹕* 2009 年 6月 23 日 星期二 上午 11:33:36 > *主題：* ntop 3.3.10 compilation error > > Dear list, > > The problem is when I compiled the ntop 3.3.10, I got the following > error while running the autogen.sh. I have spent over 1 week to figure > out what was happened, but no answer. Appreciated if you could give me > some hints on it. > > > > ./configure: line 5147: LTOPTIONS_VERSION: command not found > > ./configure: line 5148: LTSUGAR_VERSION: command not found > > ./configure: line 5149: LTVERSION_VERSION: command not found > > ./configure: line 5150: LTOBSOLETE_VERSION: command not found > > checking for a sed that does not truncate output... /bin/sed > > ./configure: line 5227: syntax error near unexpected token > `lt_decl_varnames,' > > ./configure: line 5227: `lt_if_append_uniq(lt_decl_varnames, SED, , ,' > > > > > > Regards, > > > > Eddie Li ________________________________ Yahoo!香港提供網上安全攻略，教你如何防範黑客!了解更多 <http://hk.promo.yahoo.com/security/> <font size="1"> <div style='border:none;border-bottom:double windowtext 2.25pt;padding:0in 0in 1.0pt 0in'> </div> "This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system." </font>
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
