Thanks much Ken! Don -------------------------------------------- On Mon, 10/28/13, Ken Cornetet <[email protected]> wrote:
Subject: RE: [NTSysADM] Migrating from Infoblox to MS DNS General questions To: "[email protected]" <[email protected]> Date: Monday, October 28, 2013, 1:08 PM That's exactly how we did our infoblox to MS DNS migration. Set up secondaries on the MS side, shut down the infoblox, then convert the MS zones to primaries. IIRC, you can't go directly to AD integrated - you have to make them primaries first, then AD integrated (if that is what you want). Clean up the nameserver records. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Don Kuhlman Sent: Monday, October 28, 2013 1:52 PM To: [email protected] Subject: [NTSysADM] Migrating from Infoblox to MS DNS General questions Hi folks. Happy almost Halloween! I had some generic questions for anyone that may have worked on an Infoblox to Microsoft DHCP/DNS migration. From what I've found reading the doc and googling, you can export the Infoblox dns info to a flat file, then use that to import into MS DNS, which I thought would be a good method for a DMZ configuration. I also read that you could just set up a new zone in MS as a 2ndary, then do a zone transfer from the Blox appliance to the MS 2ndary zone, confirm it all moved over, make the MS primary, point everything to the MS server, then decomm the Blox and manage MS from there. Are there any gotchas for those that have in this scenario? For example, are there any types of Blox DNS records that MS doesn't support from a pure DNS point of view ? Any gotchas on leaving the Blox Grid type of setup to MS ? Thanks, Don K
