pogostck is just the site name. The tool is the well-used one by Peter Nordahl. If the RAID is hardware-based it’ll recognize it just fine. From: J- P Sent: Tuesday, November 12, 2013 1:19 PM To: [email protected] Subject: RE: [NTSysADM] OMSALIVE equivalent for HP
Will pogo stick recognize the raid? Jean-Paul Natola -------------------------------------------------------------------------------- From: [email protected] To: [email protected] Subject: Re: [NTSysADM] OMSALIVE equivalent for HP Date: Tue, 12 Nov 2013 13:17:03 -0600 If that doesn’t work (though it should) use http://www.pogostick.net/~pnh/ntpasswd/. That’s been my go-to tool for this for years and still works on 2008r2 (did it just last week). From: Kennedy, Jim Sent: Tuesday, November 12, 2013 1:10 PM To: [email protected] Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Reset Windows server 2008r2 Password with Installation CD 1. Insert the installation disk to your locked computer, restart. When following interface appears. Cllick“Repair your computer”. 2. A dialog with several options pops up, click Command Prompt. 3. When a Command Prompt black screen appears, type "copy c:\windows\system32\sethc.exe" and press Enter. Then type "copy c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe" afterwards press Enter key. 4. Restart your computer. On the login screen, tap Shift key five times and you'll see a command prompt screen in administrator mode. OK, type "net user UserName NewPassword" (replace the UserName and UserPassword with which you wanna) and press Enter key. The user password will be replaced with new one. Close the window and then you can login that user with new password. From: [email protected] [mailto:[email protected]] On Behalf Of J- P Sent: Tuesday, November 12, 2013 2:04 PM To: [email protected] Subject: RE: [NTSysADM] OMSALIVE equivalent for HP 2008r2 - tried blank password in safe no-go Jean-Paul Natola -------------------------------------------------------------------------------- From: [email protected] To: [email protected] Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Date: Tue, 12 Nov 2013 18:37:05 +0000 What OS on the server? Boot it into safe mode, log in as administrator with a blank password. From: [email protected] [mailto:[email protected]] On Behalf Of J- P Sent: Tuesday, November 12, 2013 1:35 PM To: [email protected] Subject: [NTSysADM] OMSALIVE equivalent for HP Hi all, I was wondering if HP had equivalent to Dell's LiveOS cd , i have never used an HP before so I really dont know what tool/utilities are available- Long story short, I need to get data from a server that no-one knows the password to, i have tried ophcrack but evidently SLAX doesn't have the HP drivers to recognize the array Jean-Paul Natola
