What is the RAID level of the volume from which you're trying to grab data?
On Wed, Nov 13, 2013 at 10:41 AM, J- P <[email protected]> wrote: > HIRENs boot cd didnt find windows either > > > > > > > > > > > > Jean-Paul Natola > > > > ------------------------------ > From: [email protected] > To: [email protected] > Subject: RE: [NTSysADM] OMSALIVE equivalent for HP > Date: Wed, 13 Nov 2013 09:23:24 -0500 > > I downloaded the drivers for redhat 4 and 5, maybe i'm selecting the wrong > version of Linux? > the tool is pretty straight forward in directions, press F to fetch > drivers from usb or floppy- > > One thing i noticed on the screen when fetching the drivers is that it > says looking for driver*zip, yet the driver i downloaded are .dd > > I will try the HIREM cd next- thanks > > > J > > ------------------------------ > Subject: RE: [NTSysADM] OMSALIVE equivalent for HP > Date: Wed, 13 Nov 2013 09:15:53 -0500 > From: [email protected] > To: [email protected] > > I’m not surprised… > > > > Have you read the FAQ for the tool on this? It needs the linux drivers > (not Windows, obviously), but even if that’s what you did, the FAQ suggests > that it’s not necessarily going to work… in many cases he has to add them > to the tool… and he asks that people not email him with requests…. > > > > He does give some other tool suggestions to try there though... there are > several boot CD’s that are around as well that might have a more > comprehensive driver repository on them. One I’ve used is “HIREM BOOT CD”. > > > > -sc > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *J- P > *Sent:* Tuesday, November 12, 2013 10:17 PM > *To:* [email protected] > *Subject:* RE: [NTSysADM] OMSALIVE equivalent for HP > > > > found drivers for the p410i on the HP site, copied it to a usb drive- and > when i try to "manually add driver" it doesnt find them on my usb drive- > not sure what to try next- not even sure which of the drivers I actually > need > > and its a p410i smart array controller if that helps > > > > > > > > > > > > Jean-Paul Natola > > > ------------------------------ > > From: [email protected] > To: [email protected] > Subject: RE: [NTSysADM] OMSALIVE equivalent for HP > Date: Tue, 12 Nov 2013 19:46:43 -0500 > > so im sitting here and after it did not find any windows , i told it to > auto probe- and I cant tell if it is actually doing anything or if it > crashes, last line on screen is > > End of trace fc900d00f6104ce8 > Segementation fault > [pata_radisys] > > and the cursor is blinking > > and its a p410 controller according to the bios > > > > > > > > > > > > Jean-Paul Natola > > > ------------------------------ > > From: [email protected] > To: [email protected] > Subject: RE: [NTSysADM] OMSALIVE equivalent for HP > Date: Tue, 12 Nov 2013 14:50:19 -0500 > > I will report back tonight with my findings > > > > > > > > > > > > Jean-Paul Natola > > > ------------------------------ > > Subject: RE: [NTSysADM] OMSALIVE equivalent for HP > Date: Tue, 12 Nov 2013 14:48:51 -0500 > From: [email protected] > To: [email protected] > > I’ve had it happen a number of times. Especially with newer hardware. > > > > -sc > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *Daniel Chenault > *Sent:* Tuesday, November 12, 2013 2:47 PM > *To:* [email protected] > *Subject:* Re: [NTSysADM] OMSALIVE equivalent for HP > > > > I’ve never had a problem in the 10+ years I’ve been using it on a wide > variety of controllers. Only one time did I have to abort and find the > right driver off their page first. > > > > *From:* Steven M. Caesare <[email protected]> > > *Sent:* Tuesday, November 12, 2013 1:41 PM > > *To:* [email protected] > > *Subject:* RE: [NTSysADM] OMSALIVE equivalent for HP > > > > Perhaps not “just fine”. > > > > Provided the disk has included the linux drivers for said hardware already > on it, it will work. If not then no, the disk will not recognize the RAID > volume, and then you’ll have to decide if you want to attempt to locate and > add the drivers. > > > > The FAQ for the utility addresses this. > > > > -sc > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *Daniel Chenault > *Sent:* Tuesday, November 12, 2013 2:35 PM > *To:* [email protected] > *Subject:* Re: [NTSysADM] OMSALIVE equivalent for HP > > > > pogostck is just the site name. The tool is the well-used one by Peter > Nordahl. > If the RAID is hardware-based it’ll recognize it just fine. > > *From:* J- P <[email protected]> > > *Sent:* Tuesday, November 12, 2013 1:19 PM > > *To:* [email protected] > > *Subject:* RE: [NTSysADM] OMSALIVE equivalent for HP > > > > Will pogo stick recognize the raid? > > > > > > > > > > > > Jean-Paul Natola > > ------------------------------ > > From: [email protected] > To: [email protected] > Subject: Re: [NTSysADM] OMSALIVE equivalent for HP > Date: Tue, 12 Nov 2013 13:17:03 -0600 > > If that doesn’t work (though it should) use > http://www.pogostick.net/~pnh/ntpasswd/. That’s been my go-to tool for > this for years and still works on 2008r2 (did it just last week). > > > > *From:* Kennedy, Jim <[email protected]> > > *Sent:* Tuesday, November 12, 2013 1:10 PM > > *To:* [email protected] > > *Subject:* RE: [NTSysADM] OMSALIVE equivalent for HP > > > > Reset Windows server 2008r2 Password with Installation CD > > 1. Insert the installation disk to your locked computer, restart. When > following interface appears. Cllick“Repair your computer”. > 2. A dialog with several options pops up, click Command Prompt. > 3. When a Command Prompt black screen appears, type "copy > c:\windows\system32\sethc.exe" and press Enter. Then type "copy > c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe" afterwards press > Enter key. > 4. Restart your computer. On the login screen, tap Shift key five times > and you'll see a command prompt screen in administrator mode. OK, type "net > user UserName NewPassword" (replace the UserName and UserPassword with > which you wanna) and press Enter key. The user password will be replaced > with new one. Close the window and then you can login that user with new > password. > > > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *J- P > *Sent:* Tuesday, November 12, 2013 2:04 PM > *To:* [email protected] > *Subject:* RE: [NTSysADM] OMSALIVE equivalent for HP > > > > 2008r2 - tried blank password in safe no-go > > > > > > > > > > > > Jean-Paul Natola > > ------------------------------ > > From: [email protected] > To: [email protected] > Subject: RE: [NTSysADM] OMSALIVE equivalent for HP > Date: Tue, 12 Nov 2013 18:37:05 +0000 > > What OS on the server? Boot it into safe mode, log in as administrator > with a blank password. > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *J- P > *Sent:* Tuesday, November 12, 2013 1:35 PM > *To:* [email protected] > *Subject:* [NTSysADM] OMSALIVE equivalent for HP > > > > Hi all, > > I was wondering if HP had equivalent to Dell's LiveOS cd , i have never > used an HP before so I really dont know what tool/utilities are available- > > Long story short, I need to get data from a server that no-one knows the > password to, i have tried ophcrack but evidently SLAX doesn't have the HP > drivers to recognize the array > > > > > > > > > > > > Jean-Paul Natola > >
