Try this hotfix on both the clients and server.
http://support.microsoft.com/kb/2775511 From: [email protected] [mailto:[email protected]] On Behalf Of Nigel Parker Sent: Monday, January 06, 2014 3:25 AM To: [email protected] Subject: RE: [NTSysADM] Windows 7 and Windows Server 2008 R2 file transfer latency I may be on the wrong track However we had issues with 64bit windows 7 clients we run an ip4 network internally and found this solved our problem 1) Run the following commands through a CMD prompt with Admin rights. netsh interface tcp set global autotuninglevel=disabled netsh interface tcp set global rss=disabled 2) Turn off Remote Differential Compression - RDC Go to Control Panel => Programs => Turn Windows features on or off => Deselect "Remote Differential Compression" 3) Set "Link Speed and Duplex" in network card properties from "Auto Negotiate" to match your line speed of your switch. In my case this was "100 MB Full Duplex" 4) Deselect "IPv6" and "QoS" in network card protocols Reboot your PC Nigel Parker Systems Engineer Ultraframe (UK) Ltd Tel: 01200 452329 Fax: 01200 452201 Web: <http://www.ultraframe.com> www.ultraframe.com Email: <mailto:[email protected]> mailto:[email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Jimmy Tran Sent: 03 January 2014 15:42 To: [email protected] Subject: [NTSysADM] Windows 7 and Windows Server 2008 R2 file transfer latency Hi All, I previously posted a message about slow file opening and saving in office 2010 between W7 and Server 2k8r2 but had no replies. I did further testing and it seems to occur more than just office files. It occurs with any "opening" or "closing/saving" of files on the server. Once it is opened, it works fine. There was a hotfix that was supposed to resolve this issue, http://support.microsoft.com/kb/981711, but I couldn't even get that installed. I follow some other posts and disabled SMB 2.0 of my W7 client. The latency went away. Ideally, I'd like to have SMB 2.0 enabled. I'm sure someone here on this board has had this issue? Can anyone shed some light on what they did to resolve this? I'm about ready to open a support case with MS but I thought I'd try this team one more time. Thanks, Jimmy _____ <http://www.ultraframe-conservatories.co.uk/realroof> _____ Please consider the environment before printing this e-mail The statements and opinions expressed in this email are my own and may not represent those of Ultraframe (UK) Ltd. This email is subject to copyright and the information contained in it is confidential and may be legally privileged. It is sent out only for intended recipient(s). Access to this email by anyone else is unauthorised. If you are not an intended recipient, any disclosure, copying, distribution or other use or any action taken or omitted to be taken in reliance on it, is prohibited and unlawful.
