So I have a LT connected doing all kinds of downloads at Gig speed, absolutely no errors showing on the port, I believe we are ok and signing off for the weekend.
__________________________________ Stefan Jafs From: [email protected] [mailto:[email protected]] On Behalf Of Stefan Jafs Sent: May 23, 2014 14:59 To: [email protected] Subject: RE: [NTSysADM] RE: Check cable run length No, the excuse there was “stuff” in the way that would have to have been moved, I could have had it moved if he would have asked. No florescent lights we are using Metal halide lights they seem to be well shielded, and we already have drops in the middle of the floor. Anyhow hooking up a laptop to do some testing. __________________________________ Stefan Jafs From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Bourque Daniel Sent: May 23, 2014 14:41 To: '[email protected]' Subject: Re: [NTSysADM] RE: Check cable run length 10 Mbs Full Duplex link can go very far... I test it for fun with a 300 meters years ago.. No error for a weekend streaming a radio-station... Daniel Bourque De : Maglinger, Paul [mailto:[email protected]] Envoyé : Friday, May 23, 2014 11:33 AM À : '[email protected]' <[email protected]<mailto:[email protected]>> Objet : RE: [NTSysADM] RE: Check cable run length They may have done it that way because the cable would have passed over florescent light fixtures or near power conduits or transformers. Even at that he should have sought your approval before doing so. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Webster Sent: Friday, May 23, 2014 1:23 PM To: [email protected]<mailto:[email protected]> Subject: RE: [NTSysADM] RE: Check cable run length Then the contractor should redo the work at no charge. Thanks Webster From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Stefan Jafs Sent: Friday, May 23, 2014 1:12 PM To: [email protected]<mailto:[email protected]> Subject: RE: [NTSysADM] RE: Check cable run length Yes “test cable-diagnostics tdr interface”, for Cisco, however does not work on HP ☹, I had a contractor do a new drop for me, I asked him to go diagonally in the plant ceiling but he followed the walls instead, using a rolling tape measure and guesstimates we are at about 350 feet, if he had gone diagonally in the ceiling it would have been about 270 feet. It’s a CNC router so no high speed is need so we are probably ok, I’ll keep checking show interface for errors. __________________________________ Stefan Jafs From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Bourque Daniel Sent: May 23, 2014 11:52 To: '[email protected]' Subject: Re: [NTSysADM] RE: Check cable run length On recent Cisco switch, you can do that. Check the functionnalty of your HP switch Daniel Bourque De : Webster [mailto:[email protected]] Envoy?? : Friday, May 23, 2014 08:31 AM ?? : [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> Objet : [NTSysADM] RE: Check cable run length TapeMeasure.exe Thanks Webster From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Stefan Jafs Sent: Friday, May 23, 2014 10:19 AM To: [email protected]<mailto:[email protected]> Subject: [NTSysADM] Check cable run length Is there a utility I can run on a PC to check the cable distance to my HP switch or do I have to get a cable tester? __________________________________ Stefan Jafs Mise en garde concernant la confidentialité : Le présent message, comprenant tout fichier qui y est joint, est envoyé à l'intention exclusive de son destinataire; il est de nature confidentielle et peut constituer une information protégée par le secret professionnel. Si vous n'êtes pas le destinataire, nous vous avisons que toute impression, copie, distribution ou autre utilisation de ce message est strictement interdite. Si vous avez reçu ce courriel par erreur, veuillez en aviser immédiatement l'expéditeur par retour de courriel et supprimer le courriel. Merci! Confidentiality Warning: This message, including any attachment, is sent only for the use of the intended recipient; it is confidential and may constitute privileged information. If you are not the intended recipient, you are hereby notified that any printing, copying, distribution or other use of this message is strictly prohibited. If you have received this email in error, please notify the sender immediately by return email, and delete it. Thank you! Mise en garde concernant la confidentialité : Le présent message, comprenant tout fichier qui y est joint, est envoyé à l'intention exclusive de son destinataire; il est de nature confidentielle et peut constituer une information protégée par le secret professionnel. Si vous n'êtes pas le destinataire, nous vous avisons que toute impression, copie, distribution ou autre utilisation de ce message est strictement interdite. Si vous avez reçu ce courriel par erreur, veuillez en aviser immédiatement l'expéditeur par retour de courriel et supprimer le courriel. Merci! Confidentiality Warning: This message, including any attachment, is sent only for the use of the intended recipient; it is confidential and may constitute privileged information. If you are not the intended recipient, you are hereby notified that any printing, copying, distribution or other use of this message is strictly prohibited. If you have received this email in error, please notify the sender immediately by return email, and delete it. Thank you!
