cisco
On Wed, Jul 16, 2014 at 9:28 AM, Michael B. Smith <[email protected]> wrote: > What’s the password? > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Don Ely > *Sent:* Wednesday, July 16, 2014 12:19 PM > *To:* ntsysadm > *Subject:* [NTSysADM] For any of you router jockey's out there... > > > > If you ever find yourself needing to rate-limit specific traffic during > specific times of the day or week, here's a snippet on how to make that > happen. You can have multiple time ranges within a single time entry > too... IP addresses below are fakes ;) > > > > > > > > time-range DATADOMAIN_REPLICATION > > periodic daily 9:00 to 21:00 - based off of GMT per NTP config > > ! > > ! > > ip access-list extended DATADOMAIN_OUT > > remark DATADOMAIN_REPLICATION_HOSTS > > permit tcp host 192.168.206.16 host 192.168.223.79 > > permit tcp any any eq 2051 > > permit tcp host 192.168.223.79 host 192.168.206.16 > > ! > > access-list 110 remark DATADOMAIN_TIME_BASED_REPLICATION > > access-list 110 permit ip host 192.168.206.16 host 192.168.223.79 > time-range DATADOMAIN_REPLICATION > > ! > > class-map match-all DATADOMAIN_IN > > match access-group 110 > > ! > > policy-map DATADOMAIN_IN > > class DATADOMAIN_IN > > set dscp af11 > > ! > > class-map match-all DATADOMAIN_OUT > > match dscp af11 > > ! > > policy-map MY_QOS > > class DATADOMAIN_OUT > > police 250000 conform-action transmit exceed-action drop > > ! > > interface FastEthernet0/0 - connected to core network > > service-policy input DATADOMAIN_IN > > ! > > interface FastEthernet0/1 - connected to core network > > service-policy input DATADOMAIN_IN > > ! > > interface Multilink1 > > service-policy output MY_QOS >
