I should also mention, layer 3 is -NOT- needed on the switch. Layer 2 is fine, but it should at capable of VLAN tagging/trunking on the ports. Could even be something used or an older model that I have to get from eBay, etc. Just need (24) fiber/SFP ports for a goofy setup at one customer.
Jesse Rink Source One Technology, Inc. HP Partner 262 993 2231 ________________________________ From: [email protected] <[email protected]> on behalf of Jesse Rink <[email protected]> Sent: Friday, September 12, 2014 3:57 PM To: [email protected] Subject: [NTSysADM] 24port or 48port fiber switch I have a couple of old Cisco WS-C3750-24FS-S switches that are 24 port fiber switches, but all 100base-FX. Looking to replace the switch to have (24) 1Gb Fiber/SFP ports, but need to do it on the cheap. Usually I use HP switches, but, they don't have a cheap fiber switch option. Anyone have some low-end/cheap solutions for fiber switches they'd recommend? Thanks. Jesse Rink Source One Technology, Inc. HP Partner 262 993 2231
