I don't know why, saying 'Cat5' just rolls off my tongue. Yeah I agree, Cat 5e or Cat6. How about as far as min lengths? Any insight?
From: [email protected] [mailto:[email protected]] On Behalf Of Michael B. Smith Sent: Tuesday, November 4, 2014 3:19 PM To: [email protected] Subject: [NTSysADM] RE: 0.5 foot Cat5 Cables - Too short - Any potential issues? Cat5 isn't good enough for Gb. You need at least Cat5e and preferably Cat6. I've personally always used Panduit cabling boxes. Whenever I've tried to play loose with the Ethernet spec, it's always come back to bite me, eventually. [cid:[email protected]] From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Derrenbacker, L. Jonathan Sent: Tuesday, November 4, 2014 3:11 PM To: [email protected]<mailto:[email protected]> Subject: [NTSysADM] 0.5 foot Cat5 Cables - Too short - Any potential issues? I'm getting ready to replace some switch stacks. Our current cabling(patch to switch) is a mess, so I'm ripping out and starting from scratch. I'm looking around at cable design, and I like the short 6'' cat5 cables, like this: http://static.spiceworks.com/shared/post/0001/6788/FEX48pt.jpg<http://cp.mcafee.com/d/FZsSczhJ5x5Z5BdwsedTdETjjoKqemkQPqdQQNOrWbwUSztdxZNdZBYSztddyVEVp7e6N53UN-13r5vy2yJ2p6DbCOJ2p6DbCXcLICzBZx_HYCOYOU_RXBQSm4-os7nouVqWtAklrLfYG7DR8OJMddECQjt-hsd7bOabatTztPo0eAZDaTkmBrP5oBqsLB2uNZ35GQDBXThNMsYZwKd0cMYJfx5oyrfBitdglB057OFeDaBFjtH5JnBPr2bPUUSqmMo2hwJgg3xIQKCy05zihEwLPVEwtHmpEw4JC-q81bi1_Qd41sQg0CJjh1gDmcPh0nd40x0Iq85GP-4Vquq89kETZ2hIsyrQtD5> My concern is I think the IEEE minimum CAT5 cable length is 1.5 meters, but I'm not sure if that's only for cables between active devices or not. Anyone know for sure and/or have experience using short cables between patch and switch? Any issues? Not sure if it matters, but it's gig to the desktop POE. Thanks, Jon
