Yes, on using the hosts file to point to the ADFS url. But that ip is on the Netscaler inside interface for load balancing..
On Wed, Dec 10, 2014 at 8:46 AM, Damien Solodow <[email protected] > wrote: > What IP does your ADFS proxy show for the ADFS url? It needs to show the > “internal” IP of the ADFS farm, so you may need to edit your hosts file. > > > > DAMIEN SOLODOW > > Systems Engineer > > 317.447.6033 (office) > > 317.447.6014 (fax) > > HARRISON COLLEGE > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Todd Lemmiksoo > *Sent:* Wednesday, December 10, 2014 9:42 AM > *To:* [email protected] > *Subject:* [NTSysADM] ADFS Proxy configuration issue > > > > I am in the process of setting up ADFS authentication for our migration to > Office 365. I have ADFS working internally. The Proxy setup is not working, > cannot connect to the server error. > > Setup is Internet to Firewall to Netscaler to ADFS Proxy servers in DMZ to > Netscaler to server Lan ADFS servers. All ADFS servers are Server 2012R2. > > When I run the Proxy configuration on the ADFS Proxy server it errors out > with not being able to connect to the internal ADFS server. > > The DMZ is configured to allow port 443 access to/from the ADFS servers. > > Does anyone have a similar configuration that works. > > PS>>>>this is the configuration suggested by our contractors for design. > > > -- > > T. Todd Lemmiksoo > -- T. Todd Lemmiksoo
