As odd as it seems, that's pretty much my experiences with this as well. -- Espi
On Thu, May 25, 2017 at 6:59 AM, Kennedy, Jim <[email protected]> wrote: > Yea, it appears each is a case by case basis. Some had mangled their > default template. Others had an ActiveX add on from our smart board > software installed that isn’t supposed to be installed. Just gave the > tech’s a list of possible causes and when in doubt image them. > > > > *From:* [email protected] [mailto:listsadmin@lists. > myitforum.com] *On Behalf Of *Micheal Espinola Jr > *Sent:* Wednesday, May 24, 2017 4:19 PM > *To:* [email protected] > *Subject:* Re: [NTSysADM] Disabling word macro's. > > > > I've seen and heard of different causes and fixes over the years. Are the > affected staff using the same documents or are they unique situations? > > > -- > Espi > > > > > > On Wed, May 24, 2017 at 8:06 AM, Kennedy, Jim < > [email protected]> wrote: > > Office 2010 > > > > So we block word macro’s for users, and have the setting set to disable > and not warn. We have a very small number of staff, like 6 or 8 that still > get a pop up warning them macro’s are disabled. It’s very odd as it > happens even if the doc doesn’t contain macro’s. > > > > Anyone have any ideas? > > >
