Not yet. We didn't have them enabled with the EMCs, but once they're gone we plan on doing that.
Kurt On Wed, May 31, 2017 at 5:44 PM, Joseph L. Casale <[email protected]> wrote: > Do you have jumbos enabled? > >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Kurt Buff >> Sent: Wednesday, May 31, 2017 6:34 PM >> To: ntsysadm <[email protected]> >> Subject: Re: [NTSysADM] Re: Very strange problem file server - read vs. >> write >> >> Docs say backplane is 320 gigabit per second. They're stacked with 2 x >> QSPF+ cables in the stacking modules. >> >> We're about 2/3 full on the ethernet ports, and have used only 4 of >> the 8 10gbit ports. >> >> Kurt >> >> On Wed, May 31, 2017 at 5:23 PM, Don Ely <[email protected]> wrote: >> > What's the backplane speed of the Junipers? All ports in use? >> > >> > On May 31, 2017 5:21 PM, "Kurt Buff" <[email protected]> wrote: >> >> >> >> We're on vSphere 6. >> >> >> >> But it seems unlikely that the vmxnet3 adapter is at the root of this, >> >> as the hosts and VMs are well-established (almost 3 years), and the >> >> upgrade from 5.5 took place over a year ago. >> >> >> >> The only major change adjacent to this problem involved moving to the >> >> Nimble, and migrating all of the VMs away from the EMC VNX5400 and >> >> VNXe3100. They (all SANS and all hosts) are connected to a stacked >> >> pair of Juniper EX 4300s, but we did add in 4-port 10g SFP moduled and >> >> cabled the Nimble to that. >> >> >> >> Even then, it wasn't until we were a couple of weeks into the >> >> migration that we started seeing this problem. >> >> >> >> I'm willing to believe that it's the Junipers, but I want to get >> >> VMware sussed out before I head there. >> >> >> >> I say that because I haven't yet deleted the VMNICs for the EMCs - we >> >> kept the same VLAN, but migrated the address space in the VLAN (it's >> >> isolated) from 10.10.0.0/14 to 10.211.10.0/24, as the 10.10.0.0/24 >> >> space took a chunk out of our lab's address space. >> >> >> >> Kurt >> >> >> >> On Wed, May 31, 2017 at 4:55 PM, Don Ely <[email protected]> wrote: >> >> > What version of vSphere? There are some known issues with the >> vmxnet3 >> >> > adapter >> >> > >> >> > On May 31, 2017 4:51 PM, "Kurt Buff" <[email protected]> wrote: >> >> >> >> >> >> Update - still not solved: >> >> >> >> >> >> Got on a call with a MSFT rep. He ran a quick shell script that did >> >> >> the things I've already done: >> >> >> >> >> >> netsh interface tcp set global chimney=disabled >> >> >> netsh interface tcp set global rss=disabled >> >> >> netsh int tcp set global autotuning=disabled >> >> >> netsh int tcp set global congestion=none >> >> >> netsh int tcp set global netdma=Disabled >> >> >> >> >> >> I've put him off for now, as I'm seeing what might be a related >> >> >> problem crop up - the ancient CRM we're using has been spouting >> errors >> >> >> all day about not being able to write to the database. >> >> >> >> >> >> I've looked at CPU ready on both machines, and the file server's is >> >> >> pretty bad, but the other server's isn't. That's after migrating them >> >> >> to a single host together, and migrating everything else off that host >> >> >> - just those two VMs on this host. I've also looked at performance >> >> >> charts in vmware for both machines regarding disk and network, and >> am >> >> >> not seeing anything out of line. >> >> >> >> >> >> I'm trying to install the vmware support assistant appliance, but am >> >> >> running into problems with SSO auth - the vsphere infrastructure was >> >> >> upgraded from 5.5 to 6.0, and it looks like I have a project ahead of >> >> >> me to fix the SSL certs, which this post seems to cover: >> >> >> >> >> >> >> >> >> >> https://virtuallyunderstood.wordpress.com/2016/08/03/troubleshooting- >> expired-psc-certificates-with-vsphere-6/ >> >> >> >> >> >> Further, I've checked with Nimble support, and they say that there is >> >> >> some latency, but that their tools indicate that it is external to the >> >> >> array - they're pointing at vsphere or the network, and suggesting I >> >> >> should fail over the array to its other interface to see if that >> >> >> clears the problem. I'm saving that for later. >> >> >> >> >> >> I'm also going to see about setting up a machine to monitor the >> >> >> server/iSCSI switch to which the hosts and SANs are attached - what >> >> >> I'm seeing in PRTG for that doesn't give me what I want. >> >> >> >> >> >> It just goes deeper and deeper... >> >> >> >> >> >> Kurt >> >> >> >> >> >> Kurt >> >> >> >> >> >> >> >> >> I've got a ticket open with vmware now >> >> >> >> >> >> On Fri, May 26, 2017 at 12:20 PM, Kurt Buff <[email protected]> >> >> >> wrote: >> >> >> > All, >> >> >> > >> >> >> > I have a 2012R2 file server running as a VM on vSphere 6.0. >> >> >> > >> >> >> > Here's what I'm seeing: >> >> >> > >> >> >> > Copy large file (win7 ISO) from file server to workstation, I get >> >> >> > roughly 12-13Mbytes/second, wired or wireless. >> >> >> > >> >> >> > Copy that file from workstation to server over a wireless connection, >> >> >> > same speed - 12-13Mbytes/second >> >> >> > >> >> >> > Copy that file from workstation to server over wired connection, >> >> >> > speed >> >> >> > degrades to 1Mbyte/second or less >> >> >> > >> >> >> > Copy that file to another 2012R2 VM on the same host on the same >> SAN >> >> >> > volume (our print server), and speeds are 12-13Mbytes/second for >> both >> >> >> > wired and wireless. >> >> >> > >> >> >> > I've made sure that the following are disabled: RSS, atime, 8.3 >> >> >> > filename generation, TCP Chimney. >> >> >> > >> >> >> > RAM and CPU utilization on this machine are well within limits. >> >> >> > >> >> >> > I'm thoroughly stumped. >> >> >> > >> >> >> > Anyone have pointers for me? I'm about to raise a case with MSFT. >> >> >> > >> >> >> > Kurt >> >> >> >> >> >> >> >> > >> >> >> >> >> > >> >
