It’s been several years, but whenever we run into this we start to investigate device firmware and driver updates, which often can correct the problem. Just do them one at a time, usually starting with the NIC driver, then bios, then chipset, and anything else you may find that could be related. Check out your bios options for power management settings as well, sometimes that has an impact.
-Bonnie From: [email protected] [mailto:[email protected]] On Behalf Of Markus Klocker Sent: Tuesday, June 13, 2017 1:06 AM To: [email protected] Subject: [NTSysADM] GPO Startupscript fails if DHCPMediaSense is enabled on Windows 10 Hi folks, on a quick computer system with Windows 10 on a SSD installed I saw that our startup script was failing with event 1129<https://technet.microsoft.com/en-us/library/cc727335%28v=ws.10%29.aspx> followed by 1130: SupportInfo1 0 SupportInfo2 0 ErrorCode 267 ErrorDescription The directory name is invalid. ScriptType 0 During my investigation I found a Microsoft Support page<https://support.microsoft.com/en-us/help/938449/netlogon-event-id-5719-or-group-policy-event-1129-is-logged-when-you-start-a-domain-member> which also states to set DisableDHCPMediaSense to "1". That actually works and the startupscript is running again. Does anyone know if there is a better solution or another way because this is a problem if it comes to notebooks and mobile devices. Best wishes Markus
