Probably too boring for most people. I am NOT a networking virtualization host setting up person, so my request is probably too basic for most on this list.
The new hosts are build, new 10G switch is up and connected to the other switch and the new Synology 1817 NAS is up and going. The three hosts and NAS are connected to the 10G switch and DR says I need to redo my Bond config on the NAS to the 10G switch. So, after customer calls today, I still have a bit of work to do that DR has given me. Thanks Carl Webster Citrix Technology Professional | iGel Tech Community Insider | Parallels VIPP http://www.CarlWebster.com<http://t.sidekickopen01.com/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJN7t5XYgdV8QRW2zWLDn4XrdjzW7fK3rs56dwxZf67wwsR02?t=http%3A%2F%2Fwww.carlwebster.com%2F&si=6012126861197312&pi=4311b7b1-332d-4242-8585-36954b184dc7> The Accidental Citrix Admin From: [email protected] [mailto:[email protected]] On Behalf Of Don Ely Sent: Thursday, August 17, 2017 9:55 AM To: NT Issues ([email protected]) <[email protected]> Subject: Re: [NTSysADM] Help setting up my new lab VMware hosts You don't wanna do it here? :) On Thu, Aug 17, 2017 at 6:16 AM Webster <[email protected]<mailto:[email protected]>> wrote: 10G switch and new NAS are up and running. Configuring network on the XenServer host for networking was dead simple. I am stumped trying to figure out how to configure the networking on the two ESXi 6.5U1 hosts. Is there someone who wouldn't mind reaching out to me off list to help me out? The new hosts have dual 10G and 1G NICs. Thanks Carl Webster Citrix Technology Professional | iGel Tech Community Insider | Parallels VIPP http://www.CarlWebster.com<http://t.sidekickopen01.com/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJN7t5XYgdV8QRW2zWLDn4XrdjzW7fK3rs56dwxZf67wwsR02?t=http%3A%2F%2Fwww.carlwebster.com%2F&si=6012126861197312&pi=4311b7b1-332d-4242-8585-36954b184dc7> The Accidental Citrix Admin
