|
Does DHCPExim run from the command line with NO
user intervention required ?
----- Original Message -----
Sent: Tuesday, August 21, 2001 2:37
PM
Subject: RE: How to move DHCP from one
server to another - hardware upgrad e - not OS upgrade
Check this out....Fresh from Win2K magazine.
An
MS Util called DHCPExim
You
can BU and Restore DHCP settings to other servers.
Try REG ADD
Right I know the manual method works, I need
to do the same thing in a batch file...I have tried "reg restore" and
"regedit /S" neither imported the file.
----- Original Message -----
Sent: Tuesday, August 21, 2001 8:28
AM
Subject: RE: How to move DHCP from
one server to another - hardware upgrad e - not OS upgrade
use regedt32.
Navigate to
HKLM\System\CurrentControlSet\Services\DHCPServer and highlight
configuration key.
Click on File, Import and select the dhcpcfg
file
I have done this lots of times and the only
thing to be aware of is that the original and new machine are the same
SP.
What I still want to know is : how to import that registry
file from the command line........
"reg.exe" doesn't work with the DHCP registry
file
and neither does
regedit /s
Robert
In the article at Technet it describes a new utility called
DHCPExIm.exe on the Win2K ResourceKit Supp. 1
Has anyone used this utility yet? I need to move my
DHCP also, and was wondering if this works....
Diane
I think I used these instructions when I
did it.
I have done it once and it
worked, but like Kevin says, YMMV.
Regards
Rene
There is a technet
article.
Your Mileage May Vary, these are updated
instructions since I tried to do this about a year ago, it
didn't work for a crap back then.
Good luck,
Kevin
+-------------------------------------------------------------------+
Kevin
Flanagan
C/S Planning Engineer III
I/T Implementation
Department
Branch Banking & Trust Company
3261 Atlantic
Avenue, Suite 116
MC: 172-85-01-00
Raleigh, NC
27604
Voice: 919-716-6209
Has anyone moved/copied DHCP from one server
to another ? This is a total PC replacement (hardware upgrade
only - not OS)
or
Does anyone KNOW of a command line
way to import the backup
registry file. e
\winnt\system32\DHCP\backup\DHCPcfg , (it is a binary file)
?
thx,
rey
Unfortunately, it is a binary file, not an
ascii test file.....
rey
open it with
notepad.
Kevinm QWSZC,
VRY+Y, NFH, SAD-VF, DERSDESDFG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
More letters after
my names makes me Smarter.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
please respond
back to rent this ad space for your needs
DHCP server creates its own
registry backup i.e \winnt\system32\DHCP\backup\DHCPcfg
the file has no extension. It can be imported to
the registry using the regedt32 utility, however, I need
to import it in a batch file.
I have tried regedit
/s
I have tried reg from the
resource kit
neither
work.......................
Does anyone KNOW of a command
line way to import that particular registry
file.
TIA
Robert E Young
MCSE
Dallas, TX
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
***
The information in this e-mail is
confidential and intended solely for the individual or entity to
whom it is addressed. If you have received this e-mail in error
please notify the sender by return e-mail, delete this e-mail, and
refrain from any disclosure or action based on the
information.
**** http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
|
