Microsoft Support actually had me remove the /PAE once I went over 16GB. From 4 - 16 the /PAE works but above that they told me to leave it off.
----- Original Message ----- From: Ken Schaefer To: NT System Admin Issues Sent: Tuesday, January 08, 2008 8:08 AM Subject: RE: HP DL380 G5 and Win2k3 R2 Standard not showing maximum memory in OS If you are running Enterprise edition, then add /PAE switch. /3GB switch is for virtual memory (per user mode process, not physical RAM) Cheers Ken From: David W. McSpadden [mailto:[EMAIL PROTECTED] Sent: Wednesday, 9 January 2008 12:04 AM To: NT System Admin Issues Subject: Re: HP DL380 G5 and Win2k3 R2 Standard not showing maximum memory in OS Isn't that 512 of memory for video??? ----- Original Message ----- From: Ziots, Edward To: NT System Admin Issues Sent: Tuesday, January 08, 2008 8:03 AM Subject: HP DL380 G5 and Win2k3 R2 Standard not showing maximum memory in OS To the list, and those using HP DL380 G5s. Ran into a strange one this morning. I have a pair of DL380 G5's that I was adding 2 GB of memory to ( Have to add it in Pairs as I found out) and when I got the OS to finally Boot ( DIMM 1A,3A must match with DIMM 5A, 7A for the correct Advanced ECC configuration) the BIOS shows 4096MB of memory on the boot, ( BIOS 4/6/2007), but when I log into Windows I only see about 3.4GB. Checked the boot.ini ( there is no /3GB switch or /Maxmem statements) Any ideas has anyone seen this before? Z ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
