Ok,
That will be running CME and those are beyond my level of expertise. But what I do know about them is that if you are on an ISDN input the ISDN has to be confiured correclty on the the ISR to match your countries ISDN (not all ISDNS are equal) the units we work with the UC500 series are basically a bundled ISR with Call Manager Express (CME) and Unity Expres (CUE) running on them, and sold as an appliance. I know that there are specific config steps on the ISDN2 Versions and the T1/E1 versions depending on which country you are in. the software used to config the UC system is supposed to set the country specific ISDN stuff up when you tell it what country you are in, but with the ISR, the CME config will be done from CLI. You will need someone who is trained on these units to config them via CLI, and Cisco would suggest you get a local authorised partner to do it for you. Your parent company in the US should have appropraitely trained staff on board, or access to a partner who should be able to help. Graeme On 15 May 2012 10:58, HELP_PC <[email protected]> wrote: > I am asking details to my IT in Genova and I'll let you know > > Is a 2951 Integrated service router > > The problem is that a call from outside ,if not coming from a pure digital > source gets fast busy as response > > (i.e analog phone from a ISDN line) > > > > > ------------------------------ > *Da:* Graeme Carstairs [[email protected]] > *Inviato:* martedì 15 maggio 2012 10.07 > *A:* NT System Admin Issues > *Oggetto:* Re: Cisco PBXs > > hi There, > > We sell and support cisco Small Business PBX systems the UC500 series > adn Business Eddition 3000 series. > > With these units the basic unit is the same no matter which country, the > difference in the country code on the part code is down to the power supply > or power cable you get. > > > What unit is it you have and what interface are you using to connect to > the telephone network. ISDN, POTS, T1/E1 or SIP > > Graeme > > > On 15 May 2012 06:51, HELP_PC <[email protected]> wrote: > >> ****** >> >> Does anybody know if there are various models of the same pbx for various >> countries ?**** >> >> **** >> >> I received one from a Corporate (sent from **USA** or **England** to **** >> Italy****) but I get all non-digital calls rejected.**** >> >> I don’t know if it is a matter of configuration or other**** >> >> **** >> >> TIA**** >> >> **** >> >> *Guido Elia* >> >> *HELPPC - HELPPC SERVICE*** >> >> **** >> >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ >> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ >> >> --- >> To manage subscriptions click here: >> http://lyris.sunbelt-software.com/read/my_forums/ >> or send an email to [email protected] >> with the body: unsubscribe ntsysadmin >> > > > > -- > Good news everyone, you have just received an e-mail from me! > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin > -- Good news everyone, you have just received an e-mail from me! ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
