Toss all that cable in a steel drum, add some kerosene and light it. The plastic will burn away leaving the copper. Beer money!
Daniel Chenault [email protected] [Description: Description: cid:[email protected]] From: Brian Desmond [mailto:[email protected]] Sent: Wednesday, June 20, 2012 11:52 AM To: NT System Admin Issues Subject: RE: Re-cabling You should be able to have the patch panel work done ahead of time. Bring in a low voltage electrician to do it. They are incredibly fast at this stuff if they know what they’re doing and everything will be super neat, professional looking and tested. Then you just have to drop patch cables from the panels to the servers. Don’t try and recycle the patch cables you’re using now. As you reconnect servers, cut the ends off the existing cables and just pull them out from the top and then from the switch along the race ways. No caught ends, no accidentally yanking something unplugged, and no knots to mess with. Thanks, Brian Desmond [email protected]<mailto:[email protected]> w – 312.625.1438 | c – 312.731.3132 From: Tom Miller [mailto:[email protected]]<mailto:[mailto:[email protected]]> Sent: Wednesday, June 20, 2012 11:26 AM To: NT System Admin Issues Subject: RE: Re-cabling That's a great idea about the patch panel for each rack. Agreed about the labeling. I label everything here. My team is lucky I don't stamp their foreheads with name tags. >>> Brian Desmond <[email protected]<mailto:[email protected]>> >>> 6/20/2012 11:59 AM >>> The labeling I agree is far more important. Get a good label printer that’s designed for cable labeling. Rather than pulling cable all the way down in to the racks, you might want to think about putting a 24 or 48 port panel in the top (back) of each rack and then running short patch cables from there. Then on the other end you can cross connect to the switch or whatever. Thanks, Brian Desmond [email protected]<mailto:[email protected]> w – 312.625.1438 | c – 312.731.3132 From: Steven Peck [mailto:[email protected]] Sent: Wednesday, June 20, 2012 10:50 AM To: NT System Admin Issues Subject: Re: Re-cabling As we have a redundant switched network our network team uses color coding religiously. Off the top of my head it's something like: Blue for primary network, green for the secondary (for the teamed networks) Orange for backup Red for rILO They also label all connections, both ends. They are not so concerned with what the system name is, as switch/port it is connected to. Steven Peck http://www.blkmtn.org On Wed, Jun 20, 2012 at 7:20 AM, Ben Scott <[email protected]<mailto:[email protected]>> wrote: On Wed, Jun 20, 2012 at 9:27 AM, Tom Miller <[email protected]<mailto:[email protected]>> wrote: > What are your preferences? Cable color by rack, system, type, etc? It's > just aesthetics but I'm looking for ideas. If you want it to look pretty, use the same color for each rack/switch. Otherwise that's more confusing than helpful. Categorizing by VLAN or type of traffic makes some sense. E.g., yellow is DMZ, blue is main LAN, green is SAN, etc. Using a rainbow spread to each rack makes some sense. Makes it easier to tell cables apart when you're hunting for or tracing a particular cable. There are some standards for cable sheath color coding, but the ones I'm aware of are all facility-wide in scope. Most of your in-datacenter cabling would be the same color under such schemes. So I wouldn't call those helpful for this. -- Ben ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin Confidentiality Notice: This e-mail message, including attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
<<inline: image001.jpg>>
