Yep. Turned completely off and power disconnected. Same thing.
From: René de Haas [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 19, 2008 10:42 AM To: NT System Admin Issues Subject: RE: Vista SP1 Rebooting problem? Does it reboot as well if you don't do a restart, but a shutdown and then start it up? From: Steve Kelsay [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 19, 2008 3:56 PM To: NT System Admin Issues Subject: Vista SP1 Rebooting problem? OK, I guess I am the only one with this problem, so I will make the presumption is NOT SP1 related. After installing SP! on several machines with no apparent problems, I had one that installed just fine, rebooted normally during the setup, then went into a continuous reboot mode after a day of running nicely. There was a stop 7E number that flashes by too fast to see, so some device driver is not quite right. Booting into Safe mode, and eventually uninstalling and rolling back to the pre-sp1 state fixed it. This is on a home network, with lots of test devices and playthings installed, so it is full of strange devices which could be causing the conflict. Not really looking for a solution, although that would be nice, but just posting in case it is more frequent than the current postings make it seem. ________________________________ *** The information in this e-mail is confidential and intended solely for the individual or entity to whom it is addressed. If you have received this e-mail in error please notify the sender by return e-mail delete this e-mail and refrain from any disclosure or action based on the information. *** ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
