You can obtain stats like these using the IP SLA feature on Cisco devices.
http://www.cisco.com/en/US/customer/docs/ios/12_4t/ip_sla/configuration/guide/htvoipj.html
http://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper09186a00802d5efe.html
http://www.cisco.com/en/US/customer/technologies/tk648/tk362/technologies_white_paper0900aecd8022c2cc.html
http://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper0900aecd8017f8c9.html
Another option is to run something like iPerf on PCs on both ends of the
link to obtain stats.
http://dast.nlanr.net/Projects/Iperf/ (there is a Windows version available)
Thanks,
adam
----- Original Message -----
From: "Ben Scott" <[EMAIL PROTECTED]>
To: "NT System Admin Issues" <[email protected]>
Sent: Wednesday, April 23, 2008 3:26 PM
Subject: Re: How to measure packet loss/delay/jitter
On Wed, Apr 23, 2008 at 11:02 AM, Thomas Mullins
<[EMAIL PROTECTED]> wrote:
If anyone has any suggestions on how to measure packet
loss/delay/jitter, I would greatly appreciate them.
FYI, the term "packet delay variation" is the term the IETF
recommends be used, in favor of "jitter" (which I guess can be
ambiguous).
I've had the free and Open Source SmokePing recommended to me for
this purpose. I haven't gotten around to trying it yet. Screen shots
look impressive as hell, though. :)
http://oss.oetiker.ch/smokeping/
There's also good old fashioned "ping", which will give you min,
max, mean, and standard deviation for RTT time, and packet loss.
-- Ben
~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~
~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~
~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
