I have recently read Joe Fox's thread on doing this with SBS 2003, and
it was very helpful. But I'm planning on doing this from SBS 2000 to
Windows Server 2008 and wondered if there were any extra issues I may
run into because of this difference. Based on what I've read here is my
high level plan. I'd appreciate any suggestions or tips from people who
have done this. Thanks:


        
        Option # 1:
1.      Prepare the forest 
        
http://technet2.microsoft.com/windowsserver2008/en/library/1d502209-cdb9
-4e13-9a6c-57ad6c9d1e8b1033.mspx?mfr=true
        
2.      Prepare the domain:
        
http://technet2.microsoft.com/windowsserver2008/en/library/1d502209-cdb9
-4e13-9a6c-57ad6c9d1e8b1033.mspx?mfr=true
        
3.      Bring up a 2008 machine
4.      Add 2008 machine to SBS 2000 domain as an additional domain
controller
5.      Make the 2008 machine a GC server.
6.      Change the preferred DNS address of the 2008 server to point to
itself. Change the preferred DNS address of SBS 2000 server to point to
the 2008 server. 
7.      Transfer the FSMO roles to the 2008 machine. 
8.      Wait for replication to take place. Give it a good 15 minutes,
depending upon the size of your network (wait for event 1119 or 1869 to
show in the Event Viewer Directory Service Log on the 2008 machine). 
9.      Remove the GC from SBS 2000 server.
10.     DCPROMO the SBS server to remove it as a DC from the new domain.
        
        Option #2:
1.      Prepare the forest 
2.
http://technet2.microsoft.com/windowsserver2008/en/library/1d502209-cdb9
-4e13-9a6c-57ad6c9d1e8b1033.mspx?mfr=true

3.      Prepare the domain:
4.
http://technet2.microsoft.com/windowsserver2008/en/library/1d502209-cdb9
-4e13-9a6c-57ad6c9d1e8b1033.mspx?mfr=true
        
5.      Bring up a 2008 machine
6.      Add 2008 machine to SBS 2000 domain as an additional domain
controller
7.      Make the 2008 machine a GC server
8.      Change the preferred DNS address of the 2008 server to point to
itself. Change the preferred DNS address of SBS 2000 server to point to
the 2008 server. 
9.      Wait for replication to take place. Give it a good 15 minutes,
depending upon the size of your network (wait for event 1119 or 1869 to
show in the Event Viewer Directory Service Log on the 2008 machine). 
10.     Shut down the SBS 2000 server
11.     Seize the FSMO roles on the 2008 server. 
12.     Manually clean up the AD metadata




Chris Bodnar
Sr. Windows Systems Engineer
Swiftwater, PA
X3522


This communication, including any attachments, is intended solely for the use 
of the addressee and may contain information which is privileged, confidential, 
exempt from disclosure under applicable law or subject to copyright. If you are 
not an intended recipient, any use, disclosure, distribution, reproduction, 
review or copying is unauthorized and may be unlawful. If you have received 
this transmission in error, please notify the sender immediately. Thank you.

Cette communication,y compris les pieces jointes, est reservee a l'usage 
exclusif du destinataire et peut contenir des informations privilegiees, 
confidentielles, exemptees de divulgation selon la loi ou protegees par les 
droits de publication. Si vous n'etes pas un destinataire, toute utilisation, 
divulgation, distribution, reproduction, examen ou copie est non-autorisee et 
peut etre illegale. Si vous avez recu cette communication par erreur, veuillez 
aviser l'expediteur immediatement. Merci.
                                        

~ Upgrade to Next Generation Antispam/Antivirus with Ninja!    ~
~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm>  ~

Reply via email to