I have a probably-useless truncated set of messages left from the hyperterminal session, but copy them here in case anyone's interested:
00:01:45: %PM-4-ERR_DISABLE: channel-misconfig error detected on Po1, putting Ge 00:01:46: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, cn 00:01:46: %LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel1, changen 00:01:47: %LINK-3-UPDOWN: Interface Port-channel1, changed state to down 00:01:47: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down For some reason, hyperterminal was acting quite wonky while working on this, and I wasn't able to get good output. On Mon, Jun 30, 2008 at 2:00 PM, Phil Brutsche <[EMAIL PROTECTED]> wrote: > Not a clue. > > The text of the protocol error you got would help quite a bit... > > Kurt Buff wrote: >> So, if that's the case, then why does the 2950T-24 work, with exactly >> the same config as the 2950T-48? > > -- > > Phil Brutsche > [EMAIL PROTECTED] > > ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ > ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~ > ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
