Funny...I decided to do that after about 30 minutes of additional troubleshooting. Great minds think alike.
Shook ________________________________ From: Benjamin Zachary - Lists [mailto:[EMAIL PROTECTED] Sent: Friday, July 18, 2008 10:33 AM To: NT System Admin Issues Subject: RE: modify local USB install behavior p-touch and label the usb? or you could cover/disable the other ones, although I think usb is in pairs (1,2) (3,4) so only get you down to 50% chance :-) ________________________________ From: Andy Shook [mailto:[EMAIL PROTECTED] Sent: Friday, July 18, 2008 8:26 AM To: NT System Admin Issues Subject: modify local USB install behavior Yo. Deploying USB thermal printers that have some very funky drivers on XP Pro SP2 or 3. I've got the install procedure worked out and printer functions as needed. However, if you plug the printer into another USB port than where originally installed, it prompts for drivers. Upon completion of install there are two printers "installed". I realize that this is probably by design but I want to prevent this, as very non-technical people will be plugging in these printers and I don't need the headaches of the hundreds of phone calls. Bottom line, I just want these printers to work when they are plugged in and only show up once in the printers container. Merry Friday to all and to all a good day. Shook ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
