Is port 3389 listening and open I know it's a silly question but from where you are trying to connect run this command.
Nmap -sS -P0 -p 3389 IP_ADDRESS_OF_SERVER If you get filtered or closed then there is an access list or firewall blocking your communications, if its open you should be able to connect. Next get a copy of wireshark 1.01 on your pc, setup a display filter. ( Your IP (Any port) to Server IP port 3389) and sniff the traffic on the connection and send the pcap file if possible. Sincerely, EZ Edward E. Ziots Network Engineer Lifespan Organization MCSE,MCSA,MCP,Security+,Network+,CCA Phone: 401-639-3505 ________________________________ From: Jonathan Gruber [mailto:[EMAIL PROTECTED] Sent: Friday, August 01, 2008 9:23 AM To: NT System Admin Issues Subject: RE: Remote Desktop Issue Turned the firewall off and still can not connect. Jonathan Gruber Network Administrator J.B. Long Inc. 610-944-8840 x.213 484-637-1978 direct From: Steve Ens [mailto:[EMAIL PROTECTED] Sent: Thursday, July 31, 2008 3:48 PM To: NT System Admin Issues Subject: Re: Remote Desktop Issue Check the new firewall rules in Windows 2008...they might give you a clue... On Thu, Jul 31, 2008 at 12:52 PM, Jonathan Gruber <[EMAIL PROTECTED]> wrote: New 2008 server. Using hyper-v. Server has 4 Nics. Installed 2008 and Hyper-v with a single Nic hooked up to the network. Others are installed but no IP info and not physically connected. Hyper-V has one Nic setup and is running one VM using that Nic. I can remote to the host and the VM no trouble. Set IP info for another Nic and connect it, now I can't remote to the host. I can still remote to the VM but get a "This computer can't connect to the remote computer" error. Any ideas? I tried setting the RDP-Tcp connector to the first Nic but still no luck. Jonathan Gruber Network Administrator J.B. Long Inc. 610-944-8840 x.213 484-637-1978 direct ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
