The name is kind of misleading because what it does is turn off the Fast Logon Optimization and makes XP boot like its predecessors did, that is don't present a desktop until you are finished booting (drivers loaded, services initialized etc) A lot of the GPO gurus and MVPs tout that setting as a 'best practice' because it forces some of the CSE's to be processed at startup that otherwise might take a couple of background refresh cycles to process.
I've even heard of people enabling this because some of their users systems booted so fast that they didn't get all their Kerberos tickets until it was enabled... From: David Liu [mailto:[EMAIL PROTECTED] Sent: Friday, November 07, 2008 3:33 PM To: NT System Admin Issues Subject: Re: Strange login issues But doesn't this also cause prolonged delay for mobile users who take their systems off site, when their laptops cannot connect to the network to process GPO's? Or do you have separate policies for desktops vs. laptops? ________________________________ From: Don Guyer <[EMAIL PROTECTED]> Reply-To: NT Issues <[email protected]> Date: Fri, 7 Nov 2008 14:47:37 -0500 To: NT Issues <[email protected]> Subject: RE: Strange login issues We stumbled upon the "Always Wait for the Network......." setting when we rolled out a software package via GPO. When it failed, it logged a message in Event Viewer regarding the "GPO Policy Refresh" something or other. We ended up applying a GPO for that setting to every computer on the network and our support calls dropped. Don Guyer Systems Engineer Information Services Prudential Fox Roach/ Trident 431 W. Lancaster Avenue Devon, PA 19333 Ph: (610) 993-3299 Fax: (610) 650-5306 www.prufoxroach.com <blocked::blocked::http://www.prufoxroach.com/> [EMAIL PROTECTED] From: Joe Heaton [mailto:[EMAIL PROTECTED] Sent: Friday, November 07, 2008 1:49 PM To: NT System Admin Issues Subject: RE: Strange login issues That sounds promising. I'll try it, thanks Robert. Joe Heaton Employment Training Panel From: Hart, Robert [mailto:[EMAIL PROTECTED] Sent: Friday, November 07, 2008 9:09 AM To: NT System Admin Issues Subject: RE: Strange login issues We had an issue that was close to that about 2 years ago. It turned out to be new machines that had CPUs with H/T or dual cores. We ended up changing the GPO to have the setting "Always wait for the network at computer startup and logon. We have not seen the problem since. The problem was also very random for us and very hard to duplicate in a lab but happened must often on a fresh reboot with a quick logon. Robert Hart GENEX Services, Inc Client System Engineer From: Joe Heaton [mailto:[EMAIL PROTECTED] Sent: Friday, November 07, 2008 11:06 AM To: NT System Admin Issues Subject: Strange login issues Server 2K3 Windows XP SP3 We just replaced 60 user PCs. We have GPOs that map needed drives for the users. One of the login scripts maps the user to their home directory, which looks like the following: Net use F: /d Net use F: \\server\%username% /Persistent:yes The issues we're getting are the following: 1) Randomly the F: drive will not be mapped at all. 2) Randomly the F: drive will be mapped to \\server\Users, instead of the person's personal folder. I mention the rollout of new PCs, because this behavior wasn't happening beforehand. My personal preference for mapping personal drives is to do it within ADUC, under the Profile tab, but that's not how it was when I got here, and I'm still trying to plan switching it over without disrupting users. There are no other login scripts that map the F: drive, so there's no conflict there. Sometimes having the person log out and back into the network fixes it, sometimes it doesn't. Also, when I mention random, I mean it. Random users, random times, random symptom between the above two. Any help on where I can look to figure out why this is happening would be great. Thanks, Joe Heaton AISA Employment Training Panel 1100 J Street, 4th Floor Sacramento, CA 95814 (916) 327-5276 [EMAIL PROTECTED] This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. It may contain information protected by state and federal privacy and intellectual property laws. If you have received this email in error please notify the sender immediately and delete this e-mail from your system. If you are not the named addressee you should not disseminate, distribute or copy this e-mail, and you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
