No, their using different IP schemes. Replacing the Linky with a DLink did the trick. Tried a Netgear unit first - it wouln't pick up an IP address when connected to the cable modem, but did just fine on the internal network.
Roger Wright ___ On Fri, Sep 4, 2009 at 2:20 PM, Glen Johnson <[email protected]> wrote: > Could it be that the router at home is using the same ip address as the > VPN at work? > > I ran into strange problem when using 192.168.0.X at home and work. > > Changed one to 192.168.100.x and no problems. > > > > *From:* Roger Wright [mailto:[email protected]] > *Sent:* Friday, September 04, 2009 1:59 PM > > *To:* NT System Admin Issues > *Subject:* Re: Cisco VPN Client Weirdness > > > > The most recent analysis shows that the issue only shows up when making a > VPN connection through a Linksys WRT54G2 router. If I remove the router > from the path I'm able to map drives just fine. > > > > I have an older WRT54G at home - no issues. Belkin or DLink router - fine. > > > > Gee... you'd think a Linksys by Cisco router would be fully compatible with > the Cisco VPN client but apparently not! > > > > Roger Wright > ___ > > > > On Thu, Sep 3, 2009 at 9:16 PM, Roger Wright <[email protected]> wrote: > > Looks like I got it working… partially. > > I renamed the machine just in case there was an issue with certificates or > something. No change in behavior. > > Manually removed all things Cisco from the drive and registry, rebooted and > reinstalled the client, and rebooted again. > > If I connect to an available unsecured wireless network and then make the > VPN connection, I can map internal resources (but not ping). > > If I connect to to an available WPA2 wireless network I can make the VPN > connection but cannot connect to internal resources. > > In both cases the default gateway on the Cisco virtual adapter is blank. > However, on my personal machine that gateway address is 10.0.0.1. > > On my home network (WPA2) I connected to the VPN and mapped drives no > problem. > > Apparently there's an issue with the WPA2 network available from my office, > but I can't imagine what it is since I can connect and map drives fine using > other machines over that wireless network. > > Still a stumper... > > > > Roger Wright > > > > > > > > > > > > > > > > > > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
