we use a similar approach: 10.site.<section>.device, as in 10.2.120.1 where each floor of our buildings is split into seperate address for left and right side.
Full dhcp, except for servers. Regards Tony Patton Desktop Operations Cavan Ext 8078 Direct Dial 049 435 2878 email: [email protected] From: "Matthew W. Ross" <[email protected]> To: "NT System Admin Issues" <[email protected]> Date: 17/12/2009 21:33 Subject: RE: Need more IP addresses We use a 10. addresses, and separate information based on the IP. For example: 10.20.103.250 That can be read as: 10.High School.Room 103.Printer 1 Or: 10.Building.Room.Device We have all of our addresses statically assigned in DHCP, so we can keep this kind of address logic. For example, we always use IP address ending in 250-254 for printers in the room. Obviously there are flaws with this system. I can't correctly use room 402, for example. Also, when somebody moves a computer around without our knowing, the IP address no longer is useful. Another method we use when a networkable item has no home is 10.99.xxx.xxx. I this case, the 99 means this item's IP is based on it's inventory tag/barcode. For example, if the IP address was assigned to 10.99.45.23, I would know that this is tagged with barcode 4523. I then use my inventory to look up further information on the device. This would be valid up to Barcode 25599 (10.99.255.99), which is enough for us for some time. --Matt Ross Ephrata School District ----- Original Message ----- From: Ben Schorr [mailto:[email protected]] To: NT System Admin Issues [mailto:[email protected]] Sent: Thu, 17 Dec 2009 13:16:54 -0800 Subject: RE: Need more IP addresses > We actually have one client with a Class B (255.255.0.0) network and I > have to say...we really like it. Gives us a LOT of flexibility in our > addressing. 172.23.x.x is their scheme. 172.23.1.x are servers, > 172.23.2.x, 172.23.22.x and 172.23.222.x are workstations served up by > their DHCP servers. 172.23.3.x are printers and other network attached > devices, etc.. > > > > Of course, that network was set up that way from the beginning. I'm not > sure I'd want to have to go back thru and readdress everything that way > on an existing network, but I'd think about it at least. > > > > Ben M. Schorr > Chief Executive Officer > ______________________________________________ > Roland Schorr & Tower > www.rolandschorr.com <http://www.rolandschorr.com/> > [email protected] > > > > From: Jeff Johnson [mailto:[email protected]] > Sent: Thursday, December 17, 2009 11:15 AM > To: NT System Admin Issues > Subject: RE: Need more IP addresses > > > > I thought about that, but then I also thought that opening a network > that large would cause other problems. > > > > The following is a good approximation of my network. All are located > in one building with future expansion to across the parking lot in 5+ > years. > > > > 175 DHCP assigned PC's > > 15 Static ip PC's > > 10 Servers with Static IP's > > 12 Printers with static IP's > > 15 Network devices (switches/AP's) with reserved addresses. > > 20 Static IP "Other" devices > > > > Jeff Johnson > > Systems Administrator > > 714-773-2600 Office > > 714-773-6351 Fax > > > > > > From: John Aldrich [mailto:[email protected]] > Sent: Thursday, December 17, 2009 1:05 PM > To: NT System Admin Issues > Subject: RE: Need more IP addresses > > > > Why not just change your netmask to 255.255.0.0? That should be more IPs > than you will EVER use! J > > > > > > > > From: Jeff Johnson [mailto:[email protected]] > Sent: Thursday, December 17, 2009 3:49 PM > To: NT System Admin Issues > Subject: Need more IP addresses > > > > I am in need of more IP addresses on my network. > > > > My current network looks like this: > > 192.168.1.x > > 255.255.255.0 > > > > I am using 248 IP's currently, so I have very little expansion > available. I do see the potential to increase in the following year, so > I had better get my butt thinking about this soon. Plus I have > Christmas and New Year's holidays that I could work with no one on our > network for 3 full days. > > > > I am thinking about changing my subnet to something like 255.255.254.0 > or 255.255.252.0. Would this be a good way, or would I be better adding > an additional router and just creating a new 255.255.255.0 network on > 192.168.2.x? > > > > I guess my question is which is the "correct" way? > > > > Jeff Johnson > > Systems Administrator > > 714-773-2600 Office > > 714-773-6351 Fax > > > > > > > > > > > > > > > > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ ==================================================================== http://www.quinn-insurance.com This e-mail is intended only for the addressee named above. The contents should not be copied nor disclosed to any other person. Any views or opinions expressed are solely those of the sender and do not necessarily represent those of QUINN-Insurance, unless otherwise specifically stated . As internet communications are not secure, QUINN-Insurance is not responsible for the contents of this message nor responsible for any change made to this message after it was sent by the original sender. Although virus scanning is used on all inbound and outbound e-mail, we advise you to carry out your own virus check before opening any attachment. We cannot accept liability for any damage sustained as a result of any software viruses. ==================================================================== QUINN-Life Direct Limited is regulated by the Financial Regulator. QUINN-Insurance Limited is regulated by the Financial Regulator and regulated by the Financial Services Authority for the conduct of UK business. ==================================================================== QUINN-Life Direct Limited is registered in Ireland, registration number 292374 and is a private company limited by shares. QUINN-Insurance Limited is registered in Ireland, registration number 240768 and is a private company limited by shares. Both companies have their head office at Dublin Road, Cavan, Co. Cavan. ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
